25×30 Metal Building
900 sq ft — triple wide carport for vehicles or equipment
14 Gauge
Local Certification Available
No card charged online · Specialist calls within 1 business day · 10–20% deposit by phone
25×30 Metal Building Specs, Dimensions & Custom Options
The 750 sq ft 25×30 steel building footprint gives you more width than a standard single-car garage while staying compact enough for residential lots, farm storage, workshops, RV covers, and small commercial use. Configure every spec below in our free 3D builder to match your exact use case, budget, and local building codes.
| Building Footprint | 25′ Wide × 30′ Longwith leg heights from 8′ to 16′ |
|---|---|
| Total Square Footage | 750 square feetof usable interior or covered space |
| Building Configurations | Metal garage, carport, workshop, RV cover, equipment shelter, backyard storage, small barn, commercial storage buildingAll Available |
| Enclosure Options | Open carport, partially enclosed, fully enclosed with four walls, side-entry layout, end-entry garage, or custom side configurations |
| Roof Styles | Regular Roof, A-Frame Horizontal / Boxed Eave, or Vertical Roof. Vertical Roof is recommended for snow, heavy rain, and long-term drainage performance |
| Roof Pitch Options | Standard 3:12 pitch, with 4:12 and 5:12 pitch upgrades available for snow regions or steeper residential styling |
| Frame Gauge | 14-gauge galvanized steel tubing standard, 12-gauge upgrade available for heavy-use garages, workshops, coastal regions, and high-wind areas |
| Roof & Wall Panels | 29-gauge sheet metal standard, 26-gauge upgrade available for hail-prone regions, coastal climates, and longer paint life |
| Door Options | Roll-up garage doors from 6’x6′ up to 12’x12′, 36″ walk-in doors, framed openings, side-entry doors, and commercial overhead door options |
| Window Options | 30″x30″ standard, 36″x36″ or custom sizes, with insulated glazing options for hobby shops and climate-controlled storage |
| Color Options | 17 colors for roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, White |
| Wind Rating | 115 MPH standard, certified upgrades available up to 170+ MPH for hurricane, coastal, and high-wind regions |
| Snow Load | 35 PSF standard, certified upgrades available up to 65+ PSF for heavy snow regions |
| Certification | Available for any 25×30 configuration with engineered, stamped drawings that meet IBC, IRC, NEC, IFGC, IECC, and IMC codes |
| Anchoring | Concrete anchors, asphalt anchors, mobile home anchors, or auger anchors for ground installation, all included |
| Free Delivery | Included on every orderin the 48 continental US states |
| Free Installation | Included on all tubular-frame 25×30 buildings. Custom red-iron or highly engineered commercial builds may carry an install fee. |
| Lead Time | 4 to 6 weeks from order confirmation, depending on season, certification, and your local installation schedule |
| Installation Time | 1 to 2 days for most 25×30 configurations |
| Warranty | 20-year rust-through warranty plus 90-day workmanship guarantee |
Limited + Product Pledge
Paint Finish
Workmanship Guarantee
Workmanship Guarantee
12 Popular 25×30 Metal Building Uses (750 Sq Ft Layouts)
A 750 square foot prefab metal building is a flexible mid-size footprint for residential garages, workshops, vehicle storage, farm equipment, RV protection, and small business storage. Filter by use case below, pick the right configuration, and customize colors, doors, leg height, and roof style in our free 3D builder.
25×30 Metal Garage (2 Cars + Storage)
Fully enclosed 750 sq ft steel garage with room for two vehicles, a workbench, wall shelving, and seasonal storage. Add one or two roll-up doors plus a walk-in door for daily access.
25×30 Workshop / Hobby Space
750 sq ft clear-span workshop for woodworking, auto projects, welding, repairs, and weekend hobbies. The extra width gives you more bench space than a narrow garage footprint.
25×30 Metal Carport
Open 25×30 carport for two vehicles, boats, ATVs, lawn equipment, or a compact RV. Add side panels later if you want to convert the structure into enclosed storage.
25×30 Commercial Storage Building
Small business storage, contractor inventory, service tools, packaged goods, or shop overflow. Add certified engineering, 12-gauge framing, and commercial doors for permit-ready use.
25×30 RV Cover / Boat Storage
Protect a travel trailer, boat, camper, work trailer, or tall vehicle with a 25-foot-wide cover. Choose 12′ to 16′ legs for RV and boat clearance.
25×30 Home Gym / Studio
Private 750 sq ft fitness, music, art, or hobby studio. Add insulation, windows, framed HVAC openings, and a walk-in door for comfortable year-round use.
25×30 Metal Barn / Equipment Shelter
Store tractors, mowers, hay, feed, ranch tools, tack, small implements, or livestock supplies. Add lean-tos for extra covered side storage.
25×30 Man Cave / She Shed
Create a detached retreat for games, crafts, music, tools, or weekend projects. Insulation and windows make the 750 sq ft footprint feel like a true backyard extension.
25×30 Shop / Light Industrial Building
Compact shop for equipment repair, fabrication, parts storage, inventory staging, or light manufacturing. Upgrade to 12-gauge framing for heavier daily use.
25×30 Government / Institutional Storage
Municipal equipment storage, school maintenance shed, field office, emergency supply building, or parks department storage with permit-ready engineering available.
25×30 Tack Room / Feed Storage
Use the 25×30 footprint for tack, feed bins, grooming supplies, small animal shelter, hay storage, and farm tools. Add ventilation and walk-in access for daily chores.
25×30 Community / Multi-Purpose Building
Small group meeting space, volunteer storage, community equipment room, classroom annex, or multi-purpose outbuilding with insulation and code-ready options.
Not sure which 25×30 metal building configuration fits your project? Our building advisors design it free.
What’s Included in a 25×30 Metal Building Kit?
Every 25×30 prefab steel building kit ships with everything you need to stand up your structure. Free curbside delivery on every order, free professional installation on tubular-frame buildings, no hidden fees. Add upgrades to match your exact use case.
Free With Every 25×30 Metal Building Order
Everything you need ships free with no hidden fees
- 14-gauge galvanized steel frame25′ x 30′ footprint with leg height of your choice from 8′ to 16′
- Choice of 3 roof stylesRegular Roof, A-Frame Horizontal / Boxed Eave, or Vertical Roof for snow and rain runoff
- 29-gauge sheet metal panelsRoof and sides in your color choice, with 26-gauge upgrade available
- 17 color optionsPick roof, walls, and trim independently from 17 popular metal building colors
- Galvanized purlins, girts, and bracingCold-formed steel secondary framing for structural integrity
- All hardware includedFasteners, color-matched screws, sealing strips, brackets, bolts
- Painted flashings, trim, ridge capsColor-matched to your panel choices, 20-year paint warranty
- Foundation-matched anchorsConcrete, asphalt, mobile home, or auger anchors based on your install surface
- FREE delivery to all 48 statesCurbside delivery to your install address, no hidden freight charges
- FREE installation on tubular buildingsMost carports, garages, barns, RV covers, workshops, and standard enclosed buildings
- 20-year rust-through warrantyPlus 90-day workmanship guarantee on labor and assembly
+ Popular 25×30 Building Upgrades & Add-Ons
Optional add-ons to configure your 25×30 prefab building exactly the way you want it
- Side panel enclosureConvert a 25×30 carport into a fully enclosed garage, workshop, or equipment storage building
- 12-gauge steel frame upgradeRecommended for commercial, coastal, high-wind, or heavy-use workshop applications
- 26-gauge sheet metal upgradeThicker panels for hail-prone regions, coastal climates, and longer paint life
- Certified / engineered drawingsStamped plans, foundation drawings, wet-stamped permit packages, and wind/snow calculations
- Higher wind and snow ratingsUp to 170+ MPH wind for hurricane zones and up to 65+ PSF snow load
- Roll-up garage doorsSizes from 6’x6′ up to 12’x12′, plus commercial overhead door options
- Walk-in doors and framed openings36″ personnel doors, double doors, framed openings for windows, vents, or HVAC
- Windows30″x30″, 36″x36″, or custom window sizes with insulated glazing options
- Insulation packagesSingle-bubble, double-bubble, fiberglass batt, spray foam, or insulated metal panels
- WainscotingPremium two-tone look with contrasting lower panels in any of the 17 colors
- Lean-to additionsCovered side spaces for equipment, firewood, tool storage, feed, or outdoor work areas
- Taller leg heights up to 16′For RVs, taller trucks, car lifts, overhead shelving, and commercial clearance
Customize & Build Your 25×30 Metal Building Online
Every option below is selectable in our free 3D builder or your custom quote. The 25′ x 30′ footprint stays the same. Roof style, leg height, gauge, doors, windows, color, and insulation are all yours to choose.
Leg Height (8′ to 16′)
The 25×30 footprint stays fixed while leg height is yours to choose. Carports start at 8′ to 9′. Garages typically use 9′ to 12′. RV covers and taller equipment shelters often use 12′ to 16′ for clearance.
3 Roof Styles
Regular Roof is the most affordable option. A-Frame Horizontal, also called Boxed Eave, gives a classic peaked look. Vertical Roof uses vertical panels and is recommended for snow, heavy rain, and long-term runoff performance.
Roof Pitch & Slope
Standard 3:12 roof pitch works for most 25×30 buildings. Upgrade to 4:12 or 5:12 pitch for heavy snow regions, steeper curb appeal, or a roofline that better matches your home or barn.
Frame Gauge (14 or 12)
14-gauge galvanized steel tubing comes standard and works well for most garages, carports, sheds, and barns. Upgrade to 12-gauge for coastal climates, high-wind zones, commercial storage, or heavy-use workshops.
Sheet Metal Gauge (29 or 26)
29-gauge sheet metal panels are standard for roof and walls. Upgrade to 26-gauge in hail-prone regions, coastal areas, or when you want a heavier exterior shell with longer-term durability.
Certification & Engineering
Certified buildings come with stamped engineered drawings, foundation plans, and wind / snow load calculations matched to your local code. Recommended for permitted garages, commercial storage, and high-wind or heavy-snow regions.
Roll-Up Garage Doors
Roll-up garage doors from 6’x6′ up to 12’x12′ are available. A 25×30 garage commonly uses one 10’x8′ or 9’x8′ door, while side-entry layouts can use two smaller roll-up doors.
Walk-In Doors
36″ personnel doors with full frames, weatherstripping, and locksets are available. Add one walk-in door for daily access without opening the main roll-up door.
Hydraulic & Rapid Doors
Hydraulic one-piece doors and rapid-entry doors are available for special commercial or equipment applications, though most 25×30 builds use standard roll-up doors.
Windows & Skylights
30″x30″ insulated windows are standard, with 36″x36″ and custom sizes available. Add skylights or extra windows for workshops, studios, and hobby spaces that need natural light.
Framed Openings
Order framed openings for future windows, vents, HVAC units, custom doors, or expansion plans. Framed openings help avoid cutting into the structure later.
Garage Door Openers & Windows
Chain-drive, belt-drive, or smart Wi-Fi openers are available. Window kits for roll-up doors add daylight while keeping the building secure.
17 Standard Color Options
Choose from Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White. All colors carry a 20-year paint warranty and resist fade from UV exposure.
Mix-and-Match Roof, Walls, Trim
Pick a different color for your roof, wall panels, and trim. Popular pairings include White walls with Barn Red roof for a barn look or Pewter Gray walls with Black trim for a modern garage finish.
Wainscoting (Two-Tone Walls)
Add wainscoting for a premium two-tone look. Lower 3′ to 4′ of wall in a contrasting color adds curb appeal and helps hide mower, tool, and vehicle scuffs near the base.
Galvalume (Bare Metal Finish)
Galvalume is a hot-dipped aluminum-zinc coating with no paint. It is cost-effective, corrosion-resistant, and works well for rural, agricultural, and industrial-style 25×30 buildings.
Painted Trim & Flashings
Color-matched ridge caps, eave trim, corner trim, gable trim, and rake trim finish the building cleanly. Hardware and screws can be color-matched to your panel package.
Custom Color Match
Need to match an existing home, HOA requirement, shop, barn, or business color? Custom paint matching is available for an upcharge with sample approval before final order.
Insulation Options
Single-bubble, double-bubble, fiberglass batt, spray foam, and insulated metal panels are available. Choose based on climate, condensation control, and whether your 25×30 will be heated or cooled.
Lean-To Additions
Add a lean-to on one or more sides for firewood, mower parking, farm tools, outdoor work areas, or extra equipment cover without enlarging the enclosed footprint.
Mezzanines & Lofts
Partial lofts can add overhead storage in taller 25×30 buildings. Mezzanines require engineering and are best planned before fabrication if you need rated storage loads.
Interior Partitions
Divide the 750 sq ft into vehicle space, tool storage, office, mechanical closet, feed room, or hobby zone using steel-stud partitions or insulated interior panels.
Trim, Anchors, Gables
Decorative trim, contrast corners, finished gables, and color-matched anchors give the 25×30 a clean, intentional look that blends with the home, shop, or barn.
Flooring Prep
We do not pour foundations, but we guide you on the right slab spec. Concrete pads are recommended for garages, workshops, and studios. Gravel or level dirt can work for carports and farm storage.
Wind & Snow Certification
Standard 115 MPH wind and 35 PSF snow load are available on many 25×30 configurations. Certified upgrades can reach 170+ MPH wind and 65+ PSF snow load depending on your local code.
Permit-Ready Drawings
Stamped engineered drawings, foundation plans, and code calculations are available for permit offices, HOAs, insurance requirements, and certified building packages.
Door Locks & Access Control
Slide bolts, deadbolts, keypad entry, smart locks, and Wi-Fi connected garage door openers are available for secure tool, vehicle, and equipment storage.
Fire Safety & Alarms
Smoke and heat detectors, Class ABC fire extinguishers, emergency lighting, and fire-rated options can be added depending on occupancy and local code requirements.
Anchoring System
Concrete wedge anchors, asphalt anchors, mobile-home anchors, or auger ground anchors are matched to your foundation surface. All anchors are included with your build.
Solar & Roof-Top Loads
Engineered roof upgrades can support solar panels, small HVAC units, ventilation fans, satellite dishes, or other rooftop equipment when specified before fabrication.
25×30 Metal Building Codes, Permits & Engineering
Every 25×30 prefab steel building we sell can be engineered, stamped, and certified to meet your local building codes. Certification is recommended for permitted garages, workshops, commercial storage, and high-wind or snow-zone builds.
We also adhere to plumbing codes, energy conservation standards, and any state or local requirements. Our team handles code compliance so you have total peace of mind.
How to Maintain a 25×30 Metal Building
Simple seasonal upkeep keeps your 25×30 prefab steel building structurally sound, weather-tight, and looking sharp through the full 20-year rust-through warranty period.
What Can You Do with 750 Square Feet?
A 25×30 metal building gives you practical covered space for vehicles, storage, hobbies, equipment, farm supplies, and small business use
Two-Car Garage
Park two vehicles with room for tools, shelving, seasonal bins, and wall-mounted storage
Workshop Space
Use the 750 sq ft layout for workbenches, repair bays, hobby tools, and project materials
Equipment Shelter
Protect mowers, ATVs, trailers, compact tractors, and valuable tools from weather and theft
Small Business Storage
Store inventory, jobsite tools, boxed goods, supplies, and contractor materials in a secure building
Roll-Up Door Access
Add one large roll-up door or two smaller doors for easy vehicle and equipment access
Home Gym or Studio
Use the space for fitness, yoga, music, art, crafting, or a detached hobby room
Farm & Ranch Use
Shelter feed, tack, tools, hay, small implements, and livestock supplies with steel protection
RV or Boat Cover
Choose taller legs to protect a camper, boat, trailer, or outdoor recreation equipment
3 Ways to Order Your 25×30 Metal Building
Customize your 25×30 steel building in our free 3D builder, request a free custom quote, or talk directly with a building expert. Reservation deposit typically ranges from 10% to 30% based on your state and manufacturer. Final balance due only after your installation is complete.
Request Free 25×30 Quote
Free custom design, reply within 24 hours
Tell us your requirements and our 25×30 building advisors will design and price your custom steel building for free. Best path if you need permit help, certified drawings, an enclosed conversion, or a specific door and storage layout.
- Free expert design consultation
- Permit and certification handled for you
- Custom layout and engineered drawings
- Quote delivered within 1 business day
Free quote. Flexible deposit to reserve after approval.
Build Your 25×30 in 3D
Design your 25×30 yourself, see live pricing
Use our interactive 3D metal building builder to customize every detail of your 25×30 build. Pick configuration, height, doors, windows, colors, gauge, side panels, insulation, and roof style.
- Visual 3D customization tool
- Live pricing as you customize
- Reserve your build with flexible deposit
- Balance due only after installation
Free tool. Flexible deposit to reserve your build.
Talk to a 25×30 Building Expert
Fastest answers, call or chat now
Speak directly with a building advisor who specializes in 25×30 metal buildings. Get pricing, permit guidance, configuration help, and customization advice in minutes.
- Instant answers over the phone
- Expert advice on permits, codes, and sizing
- Walk-through of customization options
- Mon to Fri 8am to 6pm PST, Sat 9am to 3pm
Toll-free. Speak with an expert now.
How the 3D Builder Works
Design your ideal 25×30 metal building in minutes
1. Launch Builder
Open the builder in a new tab so you can keep this page available while designing.
2. Configure Your Building
Set size, roof style, certification, colors, doors, side panels, and other custom options.
3. Save Your Design
Copy your configuration code or summary before returning to this product page.
4. Complete Your Request
Send us your final configuration and we will confirm pricing, scheduling, and installation details.
Ready to design your custom 25×30 metal building?
Tip:Keep this page open so you can return and submit your final configuration with ease.
How Much Does a 25×30 Metal Building Cost?
No hidden fees on any 25×30 prefab steel building. A 25×30 metal carport starts around $4,995, an enclosed garage from $8,495, a metal barn from $7,295, an RV cover from $5,795, and a commercial certified build from $10,995. Add foundation prep based on slab, gravel, or site requirements for the complete project cost.
Building Configuration
A 25×30 carport is the cheapest entry point. Enclosing it as a garage adds wall panels, doors, trim, and hardware. Commercial certified builds add engineering and upgraded materials.
Your Location
Delivery distance, regional labor rates, state-specific certification requirements, and local wind or snow loads affect the final price.
Steel Gauge
14-gauge galvanized tubing comes standard. 12-gauge adds strength and is recommended for heavy-use workshops, commercial storage, coastal regions, and high-wind zones.
Roof Style & Pitch
Regular Roof is the most affordable. A-Frame Horizontal adds curb appeal. Vertical Roof costs slightly more but is recommended for snow and heavy rain runoff.
Certification
Certified buildings with engineered, stamped drawings cost more but may be required for garages, workshops, commercial storage, and builds in high-wind or snow regions.
Doors, Windows, Insulation
Each roll-up door, walk-in door, window, framed opening, and insulation package changes the price. Most enclosed 25×30 garages include one roll-up and one walk-in door as the starting layout.
25×30 Metal Building Complete Price Range
Range covers an open carport at the low end through a fully loaded certified garage, workshop, or commercial storage building with 12-gauge upgrade, insulation, multiple doors, windows, and engineered drawings at the high end.
Flexible Financing & Rent-To-Own
Choose the payment path that fits your project and budget
Traditional Financing
Credit Check Required
- Finance your metal building project
- Structured monthly payment options
- Terms based on lender approval
- Fast online application process
- Ownership from day one
Rent-To-Own (RTO)
No Credit Check
- No credit check required
- Simple approval process
- Low upfront commitment
- Convenient monthly payments
- Great for many standard metal structures
How Delivery & Installation Works
A simple step-by-step process for getting your 25×30 metal building installed
Place Your Order
Submit your request for the 25×30 configuration and confirm colors, doors, certification, site details, roof style, and enclosure options.
Step 1
Production Scheduling
Your order is scheduled according to manufacturing capacity and your configured metal building requirements.
Step 2
Prepare the Site
Make sure your jobsite is level and accessible before the install team arrives. Concrete, gravel, asphalt, or level dirt can work depending on your selected configuration.
Step 3
Installation Day
Our crew installs the 25×30 metal building and verifies the final layout, door placement, anchoring, and exterior finish details.
Step 4
25×30 Metal Building Reviews from Verified Buyers
Homeowners, small business owners, and farm operators across 48 states trust Steel And Stud for 25×30 metal garages, carports, workshops, barns, RV covers, and storage buildings.
“Ordered a 25×30 fully enclosed garage for two vehicles and a workbench. The extra width made a big difference compared with the narrow garage we first considered. Install was fast and the vertical roof looks great.”
“We use our 25×30 as a farm equipment and feed storage building. It fits the tractor, mower, and several racks of supplies. The steel frame feels solid, and the Rent-To-Own option made it easy to move forward.”
“My 25×30 workshop has enough room for tools, shelves, a small lift, and project storage. We added insulation and two windows, and it has become the most useful building on the property.”
Compare 25×30 vs. Other Metal Building Sizes
Need a different size? Compare prices and customize any of these prefab steel building sizes in our free 3D builder. Every order ships free to 48 states, includes free professional installation on tubular-frame buildings, and comes with a 20-year rust-through warranty.
| Feature | 20×30 Building | 25×30 Building | 25×40 Building | 30×30 Building |
|---|---|---|---|---|
| Square Footage | 600 SF | 750 SF | 1,000 SF | 900 SF |
| Use Capacity | 1-2 car storage | 2-car garage + workspace | Large workshop | Square garage layout |
| Access Potential | Good | Very Good | Excellent | Very Good |
| Roof Style | Customizable | Customizable | Vertical Recommended | Customizable |
| Best For | Compact garage | Garage, workshop, RV cover | More depth and storage | Wide two-bay setup |
| View 20×30 | You’re Here | View 25×40 | View 30×30 |
25×30 Metal Building FAQ: Cost, Permits, Sizes & Install
Everything you need to know before ordering your custom 750 sq ft prefab steel building. Get answers on pricing, configurations, leg heights, roof styles, 17 color options, foundation prep, and code compliance.
Request Your Custom Design & Quote
Tell us about your project and we’ll provide a custom design with exact pricing. No obligation, no pressure just helpful information to guide your decision.
🔒 A specialist calls within 1 business day. We never share your details.
Customize Other Metal Building Sizes
Nearby width and length variants across our full metal building lineup — buildings, carports, garages, barns, and RV covers.
24x30 Metal Building
25x25 Metal Building Kits for Sale
Triple Wide Metal Garages - 30 x 30 x 12
Metal Garage With Lean-to - 20 x 30 x 10
Triple Wide Metal Carports - 30 x 30 x 10
Standard Metal Carports - 20 x 30 x 10
20x30 Metal Building
Standard Metal Garages - 20 x 30 x 10
30x30 Metal Building
RV Metal Covers – 18 x 30 x 12 Metal Building Kit
RV Metal Covers – 18 x 30 x 14 Metal Building Kit
