30×60 Metal Building
900 sq ft — triple wide carport for vehicles or equipment
14 Gauge
Local Certification Available
No card charged online · Specialist calls within 1 business day · 10–20% deposit by phone
30×60 Metal Building Specs, Dimensions & Custom Options
A 30×60 metal building gives you 1,800 square feet of clear-span steel space for garages, workshops, RV storage, small warehouses, farm equipment, commercial storage, and hobby use. Configure every option below in our 3D builder, or work with our building advisors for engineered drawings and permit-ready plans.
| Building Footprint | 30′ Wide × 60′ Longwith leg heights from 10′ to 14’+, clear-span interior with no center posts in most configurations |
|---|---|
| Total Square Footage | 1,800 square feetof usable covered or enclosed interior space |
| Building Configurations | Garage, workshop, RV storage, equipment storage, small warehouse, agricultural building, contractor storage, retail storage, hobby shopAll Available |
| Enclosure Options | Fully enclosed 4-wall building, open shelter, partially enclosed structure, end-wall enclosure, side-wall enclosure, or custom lean-to additions |
| Roof Styles | Regular Roof for lowest cost, A-Frame Horizontal / Boxed Eave for a peaked residential look, or Vertical Roof recommended for rain, snow, and long-term durability |
| Roof Pitch Options | Standard 3:12 roof pitch on most 30×60 builds, with 4:12, 5:12, or 6:12 upgrades available for snow regions or architectural matching |
| Frame Gauge | 14-gauge galvanized steel tubing standard on many builds, 12-gauge upgrade recommended for commercial, agricultural, high-wind, or heavy-duty 30×60 applications |
| Roof & Wall Panels | 29-gauge sheet metal panels standard on many builds, 26-gauge upgrade recommended for hail-prone, coastal, commercial, or long-service applications |
| Door Options | Roll-up doors from 8’x8′ up to 12’x14′, commercial sectional doors, framed openings, hydraulic doors, and walk-in personnel doors |
| Window Options | 30″x30″, 36″x36″, 48″x48″, storefront-style glazing, insulated windows, Low-E glass, and clerestory window bands for natural light |
| Color Options | 17 colors for roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, White |
| Wind Rating | 115 to 140 MPH standard depending on configuration, with engineered upgrades certified up to 170+ MPH for hurricane and coastal regions |
| Snow Load | 30 to 40 PSF standard depending on location and roof package, with certified upgrades to 60+ PSF for heavy snow regions |
| Certification | Engineered, stamped drawings available for every 30×60 configuration and recommended for commercial, agricultural, municipal, and permitted residential use |
| Anchoring | Concrete wedge anchors, asphalt anchors, mobile-home anchors, auger anchors, or engineered anchor bolt layouts for slab and footing installations |
| Free Delivery | Included on every orderin the 48 continental US states |
| Free Installation | Free installation included on most tubular-frame 30×60 buildings. Red iron, complex commercial, or engineered specialty builds may carry a separate install quote. |
| Lead Time | 4 to 6 weeks from order confirmation. Certified, insulated, or commercial door-heavy builds may require additional scheduling time. |
| Installation Time | 1 to 3 days for most 30×60 configurations, depending on enclosure, door count, insulation, foundation, and crew access |
| Warranty | 20-year rust-through warranty plus 90-day workmanship guarantee |
12 Popular 30×60 Metal Building Uses (1,800 Sq Ft Layouts)
A 1,800 square foot 30×60 prefab steel building is ideal for garages, workshops, RV storage, farm equipment, contractor storage, small business operations, and recreational layouts. Filter by use case below and price the right configuration for your project.
30×60 Multi-Car Garage
1,800 sq ft garage for multiple cars, trucks, motorcycles, ATVs, trailers, tools, and seasonal storage. Add two or three roll-up doors for easy vehicle access.
30×60 Workshop / Hobby Shop
Large hobby or repair shop with enough room for workbenches, tool storage, welding bays, woodworking equipment, or auto restoration projects.
30×60 Small Warehouse
Compact warehouse for pallets, inventory, contractor supplies, tools, equipment, and fulfillment staging. Add roll-up access, shelving rows, and office partitions as needed.
30×60 Contractor Storage Building
Secure storage for trailers, jobsite materials, ladders, tools, machines, and business inventory. Configure multiple doors for easy loading and daily operations.
30×60 Agricultural Equipment Building
Store tractors, hay, feed, UTVs, small implements, trailers, and farm tools in a durable steel structure. Add lean-tos for livestock shade or extra covered equipment storage.
30×60 RV / Boat Storage Building
Protect RVs, boats, fifth wheels, trailers, campers, side-by-sides, and seasonal equipment. Taller leg heights and oversized doors make access simple.
30×60 Retail Storage / Showroom
Open layout for small retail display, equipment sales, furniture storage, building supplies, or mixed customer-facing showroom and backroom inventory.
30×60 Indoor Gym / Training Facility
Use 1,800 sq ft for a private gym, batting cages, turf lanes, martial arts, yoga, strength training, or indoor practice space.
30×60 Fabrication / Service Shop
Set up welding bays, repair stations, small fabrication workflows, parts storage, and tool zones in a durable 30×60 steel shop.
30×60 Municipal / Public Works Building
Compact municipal storage for park equipment, maintenance tools, emergency supplies, utility vehicles, and public works materials.
30×60 Fellowship / Community Hall
Column-free 1,800 sq ft space for small worship centers, fellowship halls, classrooms, storage rooms, or multipurpose community space.
What’s Included in a 30×60 Metal Building Kit?
Every 30×60 prefab steel building kit ships with steel framing, roof and wall panels, fasteners, trim, anchors, and the components needed for your selected configuration. Free delivery is included in 48 states, and free installation applies to most tubular-frame buildings.
Standard With Every 30×60 Metal Building Order
Everything you need ships free with no hidden fees
- 14-gauge or 12-gauge galvanized steel frame30′ x 60′ footprint with leg height of your choice from 10′ to 14’+
- Choice of 3 roof stylesRegular Roof, A-Frame Horizontal / Boxed Eave, or Vertical Roof for better rain and snow runoff
- 29-gauge sheet metal panelsRoof and walls in your color choice; 26-gauge upgrade available for commercial and heavy-weather use
- 17 color optionsPick roof, walls, and trim colors independently from 17 standard metal building colors
- Purlins, girts, and bracingCold-formed secondary framing sized for the 30-foot width and 60-foot length
- All hardware includedFasteners, color-matched screws, sealing strips, brackets, bolts, and trim hardware
- Painted flashings, trim, ridge capsColor-matched to your panel selections with 20-year paint warranty
- Foundation-matched anchorsConcrete, asphalt, mobile home, auger, or engineered anchor bolt layouts based on your install surface
- FREE delivery to all 48 statesCurbside delivery to your install address with no hidden freight charges
- Engineered drawings availableStamped plans, foundation drawings, and wind/snow calculations available for certified builds
- 20-year rust-through warrantyPlus 90-day workmanship guarantee on frame and assembly
+ Popular 30×60 Building Upgrades & Add-Ons
Optional upgrades to spec your 30×60 building for garage, shop, commercial, agricultural, or storage use
- 12-gauge frame upgradeRecommended for commercial, agricultural, workshop, high-wind, and heavy-duty applications
- Red iron beam upgradeAvailable for heavier structural requirements, mezzanines, crane prep, and long-service commercial projects
- 26-gauge sheet metal upgradeThicker wall and roof panels for hail, coastal exposure, commercial durability, and longer paint life
- Certified / engineered drawingsWet-stamped drawings, foundation plans, wind load, snow load, and code calculations
- Higher wind and snow ratingsUp to 170+ MPH wind for coastal zones and up to 60+ PSF snow load for mountain regions
- Roll-up and commercial doors8’x8′ to 12’x14′ roll-up doors, sectional doors, hydraulic doors, and oversized access openings
- Walk-in and storefront doors36″ walk-in doors, 4’x7′ commercial entries, double doors, and storefront glass entry systems
- Windows and clerestory glazing30″x30″, 36″x36″, 48″x48″, storefront, clerestory, and Low-E insulated window options
- Insulation packagesSingle-bubble, double-bubble, fiberglass batt, spray foam, vapor barriers, and insulated metal panels
- Wainscoting and two-tone wallsPremium two-tone exterior finish for garages, shops, commercial buildings, and agricultural structures
- Lean-to additionsAdd covered side bays for equipment, trailer parking, livestock shade, material staging, or outdoor work zones
- Taller leg heights up to 14’+For RVs, lifts, storage racks, agricultural machinery, mezzanines, or oversized doors
Customize & Spec Your 30×60 Metal Building Online
Every option below is selectable in our 3D builder or your custom quote. The 30×60 footprint is fixed, but roof style, leg height, frame gauge, doors, windows, insulation, colors, and certification can all be configured to your project.
Leg Height (10′ to 14’+)
On a 30×60 building, leg height usually runs from 10′ to 14’+. Garages and workshops work well at 10′ to 12′. RV storage, agricultural buildings, and lift-ready shops often use 12′ to 14′. Engineered taller heights are available on request.
3 Roof Styles
Regular Roof is the lowest-cost option. A-Frame Horizontal gives the building a classic peaked roofline. Vertical Roof is recommended for snow, heavy rain, and long-term durability because it routes water and snow straight off the eaves.
Roof Pitch & Slope
Standard 3:12 pitch works well for most 30×60 buildings. Upgrade to 4:12, 5:12, or 6:12 for snow regions, architectural appearance, or local code requirements. Cool roof coatings can help reduce heat gain in hot climates.
Frame Gauge (14 or 12)
14-gauge galvanized steel tubing is standard on many 30×60 builds. The 12-gauge upgrade is recommended for commercial, agricultural, high-wind, and heavy-duty workshop use. Red iron framing is available for heavier structural requirements.
Sheet Metal Gauge (29 or 26)
29-gauge panels are standard on many 30×60 builds. Upgrade to 26-gauge panels for commercial durability, hail-prone regions, coastal climates, and longer paint life on high-visibility buildings.
Certification & Engineering
Certified 30×60 buildings include stamped engineered drawings, foundation plans, and wind/snow load calculations matched to your local code. Certification is recommended for most commercial, agricultural, institutional, and permitted residential projects.
Roll-Up Garage Doors
Roll-up doors from 8’x8′ to 12’x14′ are available on a 30×60. Garages often use multiple 10’x10′ or 10’x12′ doors. RV and agricultural buildings may need 12’x12′ or 12’x14′ openings for taller equipment.
Walk-In Doors
32″ and 36″ walk-in doors plus 4’x7′ commercial entries are available with frames, weatherstripping, and locksets. Add personnel doors near shop bays, offices, storage rooms, or emergency exits.
Hydraulic & Rapid Doors
Hydraulic one-piece doors and high-speed rapid-roll doors are available for shop, agricultural, and commercial environments. These door systems work well where large openings or frequent daily cycles are required.
Windows & Skylights
30″x30″, 36″x36″, 48″x48″, clerestory windows, storefront glazing, and insulated glass options are available. Add daylighting for workshops, showrooms, offices, gyms, or hobby areas.
Framed Openings
Order framed openings for future doors, windows, vents, HVAC, loading areas, or expansion. Framed openings reduce future cutting and keep the building structurally clean.
Garage Door Openers & Windows
Door openers, chain-hoist systems, smart Wi-Fi controls, window kits, lock packages, and access-control options can be added to your 30×60 design.
17 Standard Color Options
All 17 standard colors are available on the 30×60: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White.
Mix-and-Match Roof, Walls, Trim
Choose separate colors for roof, wall panels, and trim. Popular combinations include Galvalume roof with Pewter Gray walls and Black trim, or White walls with Barn Red roof for agricultural use.
Wainscoting (Two-Tone Walls)
Wainscoting adds a contrasting lower wall panel, typically 3′ to 5′ high. This gives a premium look, hides lower-wall wear, and works well for garages, workshops, agricultural buildings, and commercial storage.
Galvalume (Bare Metal Finish)
Galvalume is a hot-dipped aluminum-zinc coating with no paint. It is cost-effective, corrosion-resistant, and popular for rural, agricultural, warehouse, and industrial-style 30×60 buildings.
Painted Trim & Flashings
Color-matched ridge caps, eave trim, gable trim, corner trim, and screws ship with your building. Painted components carry a 20-year paint warranty on eligible finishes.
Custom Color Match
Custom paint matching is available for brand colors, HOA requirements, municipal palettes, or matching an existing structure. Ask your building advisor for color samples before final approval.
Insulation Options
Insulation options include single-bubble, double-bubble, fiberglass batt, spray foam, vapor barriers, and insulated metal panels. Choose insulation based on whether your 30×60 will be unconditioned storage, heated shop, retail, gym, or office use.
Lean-To Additions
Add lean-tos along one or both sides for extra covered equipment storage, trailer parking, livestock shade, loading areas, or outdoor work zones without expanding the main enclosed footprint.
Mezzanines & Lofts
Partial mezzanines can add upper-level storage, parts rooms, office space, or seasonal storage. A 30×60 with enough leg height can support mezzanine layouts when engineered for live and dead loads.
Interior Partitions
Divide the 1,800 sq ft into shop bays, offices, restrooms, storage rooms, showrooms, equipment zones, or climate-controlled sections. Steel stud partitions and insulated interior panels are available.
Trim, Anchors, Gables
Decorative trim, gables, contrasting corners, and upgraded entry treatments help the 30×60 match your existing property or business identity. Anchor packages are selected based on foundation type.
Flooring Prep
We do not pour foundations, but we help guide slab planning. A 30×60 commonly uses a reinforced concrete slab, often 4″ to 6″ thick for general use, with engineered footings for commercial loads, lifts, or heavy equipment.
Wind & Snow Certification
Standard ratings vary by configuration, with 115 to 140 MPH wind and 30 to 40 PSF snow common. Certified upgrades are available up to 170+ MPH wind and 60+ PSF snow load depending on your location and engineering package.
Permit-Ready Drawings
Stamped engineered drawings, foundation plans, and code calculations are available for 30×60 buildings. These documents help with county permits, commercial approvals, insurance, and code compliance.
Door Locks & Access Control
Deadbolts, keypad locks, smart locks, commercial access control, roll-up door openers, and security doors can be added to protect tools, vehicles, inventory, or agricultural equipment.
Fire Safety & Alarms
Commercial 30×60 buildings can be configured for smoke and heat detection, exit signage, fire-rated separations, extinguisher locations, emergency lighting, and sprinkler-system-ready framing where required.
Anchoring System
Concrete wedge anchors, asphalt anchors, mobile-home anchors, auger ground anchors, or engineered embedded anchor bolt systems are selected based on your foundation, wind rating, and local code.
Solar & Roof-Top Loads
Reinforced framing can be specified for solar panels, HVAC equipment, satellite dishes, signage, fans, and other rooftop loads. Tell your advisor before ordering if you plan to add solar or mechanical equipment.
30×60 Metal Building Codes, Permits & Engineering
Every 30×60 prefab steel building can be engineered, stamped, and certified to meet your local building codes. Certification is recommended for commercial, agricultural, municipal, and any permitted 1,800 sq ft structure.
We also follow plumbing codes, energy conservation standards, accessibility requirements, and state or local occupancy requirements when applicable. Our team helps match the engineering package to your county or municipal permit office.
How to Maintain a 30×60 Metal Building
Quarterly inspections on a 30×60 building help protect the 1,800 sq ft structure, keep doors working smoothly, maintain weather-tight seals, and preserve the finish through the warranty period.
What Can You Do with 1,800 Square Feet?
A 30×60 metal building gives you flexible clear-span space for vehicles, shops, storage, business operations, agriculture, recreation, and high-clearance layouts
Multi-Car Garage
Store cars, trucks, motorcycles, trailers, ATVs, and tools in one protected steel structure
Workshop Space
Use the open floor for benches, welding, woodworking, repairs, fabrication, and hobby projects
Storage Building
Store pallets, inventory, contractor materials, equipment, or business supplies in a secure steel structure
Small Business Space
Create a contractor base, retail storage area, fulfillment room, or mixed office and storage layout
Contractor Storage
Add roll-up doors, shelving, material racks, packing zones, and clear loading access
Training Facility
Use 1,800 sq ft for gym equipment, batting cages, martial arts, yoga, or indoor practice
Agricultural Storage
Shelter tractors, hay, feed, implements, side-by-sides, trailers, and farm supplies
RV & Boat Storage
Use taller legs and oversized doors for RVs, boats, campers, lifts, and high-clearance equipment
3 Ways to Order Your 30×60 Metal Building
Spec your 30×60 in our 3D builder, request a free custom quote, or talk directly with a building advisor. Reservation deposits are flexible, and final balance is due after installation unless your project requires custom commercial terms.
Request Free 30×60 Quote
Free custom design, reply within 24 hours
Tell us your use case, location, door layout, insulation needs, and certification requirements. Our building advisors will design and price your 30×60 metal building for free.
- Free expert design consultation
- Permit and certification handled for you
- Custom layout and engineered drawings
- Quote delivered within 1 business day
Free quote. Flexible deposit to reserve after approval.
Spec Your 30×60 in 3D
Design your 30×60 yourself, see live pricing
Use our interactive 3D metal building builder to spec your 30×60. Pick roof style, height, door array, wall enclosure, color, gauge, insulation, and commercial options.
- Visual 3D customization tool
- Live pricing as you customize
- Reserve your build with flexible deposit
- Balance due only after installation
Free tool. Flexible deposit to reserve your build.
Talk to a 30×60 Building Advisor
Fastest answers, call or chat now
Speak directly with a building advisor who understands 30×60 garages, workshops, agricultural buildings, and storage structures. Get help with pricing, permits, doors, foundation prep, and delivery scheduling.
- Instant answers over the phone
- Expert advice on permits, codes, and sizing
- Walk-through of customization options
- Mon to Fri 8am to 6pm PST, Sat 9am to 3pm
Toll-free. Speak with an expert now.
How the 3D Builder Works
Design your ideal 30×60 metal building in minutes
1. Launch Builder
Open the builder in a new tab so you can keep this page available while designing.
2. Configure Your Building
Set size, roof style, certification, colors, doors, side panels, insulation, and commercial options.
3. Save Your Design
Copy your configuration code or summary before returning to this product page.
4. Complete Your Request
Send us your final configuration and we will confirm pricing, engineering, scheduling, and installation details.
Ready to design your custom 30×60 metal building?
Tip:Keep this page open so you can return and submit your final configuration with ease.
How Much Does a 30×60 Metal Building Cost?
A 30×60 metal building price depends on enclosure, roof style, gauge, height, certification, doors, windows, insulation, and location. A basic open or partially enclosed 30×60 starts around $11,500, while fully enclosed commercial and insulated configurations can reach $48,000+.
Building Configuration
Open shelters cost less than fully enclosed garages, workshops, or warehouses. Adding four walls, roll-up doors, walk-in doors, windows, insulation, and engineered drawings increases the final 30×60 price.
Your Location
Delivery distance, state-specific code requirements, local wind and snow ratings, and regional installation costs affect the final quote. Coastal and snow-heavy areas often require certification upgrades.
Steel Gauge
14-gauge framing is standard on many configurations. 12-gauge framing is recommended for commercial, agricultural, high-wind, and heavy-duty 30×60 builds. Red iron framing adds cost but supports heavier structural requirements.
Roof Style & Pitch
Regular Roof is the lowest-cost option. A-Frame Horizontal adds a finished residential look. Vertical Roof costs more but is recommended for snow, heavy rain, and long-term durability.
Certification
Certified buildings with wet-stamped drawings cost more, but they are recommended for most 1,800 sq ft commercial, agricultural, municipal, and permitted residential buildings.
Doors, Windows, Insulation
Large roll-up doors, walk-in doors, storefront glass, framed openings, insulation, and HVAC-ready options are major price variables on a 30×60 building.
30×60 Metal Building Complete Price Range
Range covers a basic open or partially enclosed 30×60 at the low end through a fully enclosed commercial build with 12-gauge framing, 26-gauge panels, multiple roll-up doors, insulation, engineered drawings, and upgraded wind/snow certification.
Flexible Financing & Rent-To-Own
Choose the payment path that fits your 30×60 building project and budget
Traditional Financing
Credit Check Required
- Finance your metal building project
- Structured monthly payment options
- Terms based on lender approval
- Fast online application process
- Ownership from day one
Rent-To-Own / Project Payment Options
Project Based
- Flexible deposit schedules
- Monthly payment options on eligible buildings
- Structured around fabrication and install milestones
- Great for larger 30×60 buildings
- Advisor support for quote documentation
How Delivery & Installation Works
A simple step-by-step process for getting your 30×60 metal building designed, delivered, and installed
Place Your Order
Submit your request for the 30×60 configuration and confirm use case, roof style, door array, insulation, certification, foundation, and site details.
Step 1
Engineering & Production Scheduling
Your order moves through final design, optional engineered drawings, fabrication scheduling, and production based on your approved 30×60 specification.
Step 2
Prepare the Site
Prepare your slab, gravel, asphalt, or engineered foundation, confirm truck access, clear the work area, and make sure utilities and staging space are ready.
Step 3
Installation Day
Our crew installs the 30×60 metal building and verifies layout, anchoring, door placement, roof system, trim, and exterior finish details.
Step 4
30×60 Metal Building Reviews from Verified Buyers
Homeowners, business owners, farmers, and property owners across 48 states use 30×60 metal buildings for garages, workshops, equipment storage, and commercial operations. A few of their stories below.
“We ordered a 30×60 fully enclosed garage with two roll-up doors and a walk-in door. It gave us enough room for trucks, tools, a trailer, and a separate workbench area.”
“Our 30×60 farm building stores hay, a tractor, feed, and two side-by-sides with room left for repair work. The vertical roof and 12-gauge upgrade were worth it for our weather.”
“We use our 30×60 as a workshop and storage building for our contracting business. The advisor helped us plan the door spacing, insulation, and color package before we ordered.”
Compare 30×60 vs. Other Metal Building Sizes
Considering a different footprint? Compare nearby steel building sizes side by side. Every order ships free to 48 states, and engineered drawings are available for certified configurations.
| Feature | 30×50 Building | 30×60 Building | 40×60 Building | 40×80 Building |
|---|---|---|---|---|
| Square Footage | 1,500 SF | 1,800 SF | 2,400 SF | 3,200 SF |
| Use Capacity | Garage or shop | Garage, shop, RV storage, or small warehouse | Larger shop or commercial storage | Expanded business or farm storage |
| Access Potential | Very Good | Excellent | Excellent | Maximum |
| Roof Style | Customizable | Vertical Recommended | Vertical / Customizable | Vertical / Customizable |
| Best For | Workshop or garage | 1,800 sq ft flexible layout | Shop expansion | Warehouse or farm operations |
| Spec 30×50 | You’re Here | Price 40×60 | Spec 40×80 |
30×60 Metal Building FAQ: Cost, Permits, Sizes & Install
Answers on pricing, configurations, leg heights, roof systems, code compliance, foundations, and load ratings for the 1,800 sq ft 30×60 prefab steel building.
Request Your Custom Design & Quote
Tell us about your project and we’ll provide a custom design with exact pricing. No obligation, no pressure just helpful information to guide your decision.
🔒 A specialist calls within 1 business day. We never share your details.
Customize Other Metal Building Sizes
Nearby width and length variants across our full metal building lineup — buildings, carports, garages, barns, and RV covers.
Triple Wide Metal Garages - 30 x 60 x 12
24x60 Metal Building Kits Built to Your Spec
Deluxe Commercial Metal Buildings - 40 x 60 x 14
Commercial Metal Buildings - 40 x 60 x 14
30x50 Metal Building
Triple Wide Metal Garages - 30 x 50 x 12
20x60 Metal Building
40x60 Metal Building
30x48 Metal Building Kits Built Your Way
30×48 Three-Car Garage with Workshop
30×48 RV Cover with Enclosed Storage
