1/5
2/5
3/5
4/5
5/5
30×60 Contractor Workshop and Office, engineered for code-compliant business use.
30×60 delivers 1800 sq ft of code-compliant contractor workshop and office space. Storefront windows on the gable end face the parking lot. Two 30×60 roll-ups serve the workshop side for materials and finished work.
🔧 Customize your build 9 options affect your price▼
- 1,800 sq ft enclosed
- Office Partition
- R-19 Insulation
- Storefront Glazing
- 180 mph wind certified
- 65 psf snow load
- 20-year rust warranty
- Free delivery + install
See how 800 sq ft fits your multi-station shop.
30 feet wide × 60 feet long. Separates dusty + clean operations. 30×60 delivers 1800 sq ft of code-compliant contractor workshop and office space.
Wood + metal benches · CNC / table-saw center · Finishing room + Material storage
Wood + metal benches at the front, cnc / table-saw center in the middle, finishing room + material storage at the rear. Capacity: multi-craft shop / small business. Storefront windows on the gable end face the parking lot.
Build your 30×60 Contractor Workshop and Office in 3D.
Design your building yourself in our free Sensei3D Designer, drag doors and windows where you want them, swap roof + trim colors, and see your spec from every angle. Save your design and email it to yourself for later.
- Drag-and-drop doors, windows, walk-ins anywhere on the building
- 16 colors applied live to roof, walls, and trim, mix & match
- Interior + exterior views of your spec, with measurements
- Save your design and share it with your contractor or family
- Auto-syncs to quote, what you build is what we price
Everything in your Contractor Workshop and Office.
All variants ship with free delivery, installation, drawings, 20-year warranty.
Contractor Workshop and Office spec sheet.
How real buyers use Contractor Workshop and Office.
30×60 Contractor Workshop and Office, what makes it different.
Engineered for your county
Every 30×60 contractor workshop and office is fabricated from American-rolled galvanized steel and engineered against the exact wind and snow loads your jurisdiction requires.
- Standard: 140 mph wind / 35 psf snow
- 12-ga upgrade: 180 mph / 65 psf
- Permit drawings stamped and emailed free
Construction details
The same materials commercial fabricators use, not residential-grade. Hot-dip galvanized fasteners, factory-baked siliconized polyester paint, Hilti-grade anchors.
- Frame: 14-ga (12-ga upgrade) galvanized tubing
- Panels: 29-ga G-90 (26-ga upgrade)
- Fasteners: #14 self-drilling with EPDM washer
Free delivery & install, really free
Regional-route delivery plus 1–2 day on-site installation by a certified crew, bundled into your headline price. No hidden unloading fees, fuel surcharges, or site-prep charges.
- $0 deposit · pay only after walkthrough sign-off
- 3–5 week lead time on regional routes
- All 48 states · rush option available
Warranty & lifespan
Engineered for a 50-year service life with industry-leading warranties on every wear surface.
- 20-yr rust-through warranty on frame & panels
- 40-yr paint warranty against fading + chalking
- 1-yr craftsmanship on installation
$0-down financing
Three financing paths to fit any credit situation. The rent-to-own option requires no credit pull at all, fastest path to a closed deal.
- RTO: $622/mo, no credit check, 36–60 mo
- Financing: 0% promo APR · 84 mo term
- Cash discount: 4% on $10K+ orders
Why 30×60?
1,800 sq ft sits in the sweet spot for residential and light-commercial, fits standard quarter-acre setbacks, comfortably below the 1,000 sq ft municipal threshold that triggers extra inspections.
- 30′ × 60′ footprint with 1,800 sq ft interior
- Permit-friendly in 96% of US counties
- Resale ROI $14,400–$21,600 added home value
Common questions from Contractor Workshop and Office shoppers.
The questions our team hears every week. Click any to expand the short answer.
How thick is the steel on a Steel and Stud 30×60 metal building?
Standard frame: 14-gauge (1.5 mm) galvanized tubing. Optional 12-gauge upgrade (2.5 mm) for high-wind/snow zones. Roof and wall sheeting ships 29-gauge standard, 26-gauge upgrade available on order.
Does Steel and Stud deliver and install in my state?
Yes, free delivery and free installation in all 48 continental states, performed by certified Steel and Stud crews. Hawaii and Alaska use custom freight quotes; call 1-877-275-7048 for either.
What’s the typical lead time for a 30×60 building?
Standard: 3–5 weeks from order confirmation to install completion. Fabrication runs the first 2–3 weeks at our US plant; regional delivery and 1-2 day install close it out. Rush builds available for $345.
Can I finance a Steel and Stud building without a credit check?
Yes, Steel and Stud’s rent-to-own partner does not pull credit. Approvals typically run 8 minutes with proof of income and first month’s payment. 36–60 month terms, no early-payoff penalty.
What’s covered under the 20-year warranty?
Steel and Stud’s 20-year rust-through warranty covers the galvanized frame against perforation, plus a 20-year paint-finish warranty against fade and chalk. Workmanship on the install is warrantied for 1 year. Warranty transfers to the next owner on resale.
What real 30×60 Contractor Workshop and Office buyers say.
No reviews yet for the 30×60 Contractor Workshop and Office
Be the first verified buyer to share your experience. Honest reviews help other steel-building shoppers make a confident decision.
Be the first to review the 30×60 Contractor Workshop and Office
No reviews yet. Your honest review helps other steel-building shoppers make a confident decision.
Talk to a real metal-building specialist.
Our team has installed 15,000+ buildings. We answer technical, permit, and financing questions every day, usually in under 8 minutes.
Complete your Contractor Workshop and Office · Save 10% bundled
These add-ons ship and install with the same crew.
Buyers who chose Contractor Workshop and Office also viewed:
Commercial Garage for Auto Repair
30×60 commercial garage for auto repair configuration, free delivery, free installation, 20-year warranty.
Customize Commercial Garage for Auto Repair →
Fleet Van Storage Building
30×60 fleet van storage building configuration, free delivery, free installation, 20-year warranty.
Customize Fleet Van Storage Building →
Fabrication Shop
30×60 fabrication shop configuration, free delivery, free installation, 20-year warranty.
Customize Fabrication Shop →
Metal Barndominium Shell
30×60 metal barndominium shell configuration, free delivery, free installation, 20-year warranty.
Customize Metal Barndominium Shell →
Horse Barn with Stalls
30×60 horse barn with stalls configuration, free delivery, free installation, 20-year warranty.
Customize Horse Barn with Stalls →
Equipment Storage Building
30×60 equipment storage building configuration, free delivery, free installation, 20-year warranty.
Customize Equipment Storage Building →
Round Bale and Tractor Storage
30×60 round bale and tractor storage configuration, free delivery, free installation, 20-year warranty.
Customize Round Bale and Tractor Storage →
RV and Boat Storage
30×60 rv and boat storage configuration, free delivery, free installation, 20-year warranty.
Customize RV and Boat Storage →
Hobbyist Workshop with Loft
30×60 hobbyist workshop with loft configuration, free delivery, free installation, 20-year warranty.
Customize Hobbyist Workshop with Loft →
Self-Storage Mini-Warehouse
30×60 self-storage mini-warehouse configuration, free delivery, free installation, 20-year warranty.
Customize Self-Storage Mini-Warehouse →
Farm Workshop and Implement Shed
30×60 farm workshop and implement shed configuration, free delivery, free installation, 20-year warranty.
Customize Farm Workshop and Implement Shed →
Contractor Workshop and Office questions, answered.
How much does a 30×60 contractor workshop and office cost?
A 30×60 contractor workshop and office from Steel and Stud starts at $29,850 with free delivery and free installation across all 48 states. Most buyers pick the rent-to-own option at about $622/month with $0 down and no credit check. Call 1-877-275-7048 for a same-day price lock.
Is delivery and installation included in the 30×60 contractor workshop and office price?
Yes, every Steel and Stud contractor workshop and office ships with free delivery + free installation by a certified crew, included in the listed price. Anchored to a concrete pad, asphalt, or compacted gravel, your building is fully erected in 1–2 days after the truck arrives.
Do I need a permit for a 30×60 contractor workshop and office?
Almost always for 1,800+ sq ft enclosed buildings. Steel and Stud emails engineered drawings stamped for your wind zone (up to 180 mph) and snow zone (up to 65 psf) at no charge, so your local building department has everything it needs. Permit timing typically runs 2–6 weeks by jurisdiction.
How is a Steel and Stud contractor workshop and office different from a wood-frame build?
Steel solves the problems wood creates, no rotting, no termites, no warping, no painting every 3 years. Our 14-gauge galvanized frame carries a 20-year rust warranty and ships with a 180 mph wind / 65 psf snow rating already engineered in. A comparable wood build typically costs 2–3× more and needs ongoing maintenance.
What foundation does a 30×60 contractor workshop and office need?
A 4-inch concrete pad poured 1 foot wider and longer than the building is the standard. Steel and Stud also anchors to asphalt or compacted gravel for open or semi-enclosed configurations. A pad-pour bundle is offered at checkout if you don’t already have a slab.
How fast can I get a 30×60 contractor workshop and office delivered?
Standard lead time is 3–5 weeks from order to install. Fabrication runs the first 2–3 weeks at our US plant; regional delivery + 1–2-day install by a certified Steel and Stud crew closes out the order. Rush builds are available, call 1-877-275-7048 for current capacity.
Can I finance a 30×60 contractor workshop and office without a credit check?
Yes, Steel and Stud’s rent-to-own partner does not pull credit. Approvals close in about 8 minutes with proof of income and your first month’s payment. Terms run 36–60 months with no early-payoff penalty, and the monthly works out to roughly $622/month on a 30×60 contractor workshop and office.
What warranty comes with the 30×60 contractor workshop and office?
Steel and Stud backs every building with a 20-year rust-through warranty on the galvanized frame and a 10-year sheeting warranty on the 29-gauge panels (upgradeable to 26-gauge or 12-gauge). Workmanship on the install is warrantied for 1 year. Full warranty terms ship with your order packet.
Can I customize the 30×60 contractor workshop and office in 3D before I order?
Yes, our free Sensei3D Designer lets you drag and drop doors, windows, and walk-ins; swap 16 roof + trim colors live; and rotate the building in 3D from every angle. No login required. The design saves directly to a quote so what you build is exactly what we price.
Does the 30×60 contractor workshop and office meet IBC commercial code?
Yes. Steel and Stud’s 12-gauge frame upgrade and 26-gauge sheeting both meet IBC commercial standards, and most counties accept our stamped drawings without revision. Engineered loads ship with the order, typical certified specs are 180 mph wind / 65 psf snow.
Your Contractor Workshop and Office quote takes one minute.
Tell us your zip and the options you want. We’ll send back a same-day, all-in price.
