80×100 Metal Building
900 sq ft — triple wide carport for vehicles or equipment
14 Gauge
Local Certification Available
No card charged online · Specialist calls within 1 business day · 10–20% deposit by phone
80×100 Metal Building Specs, Dimensions & Custom Options
An 80×100 footprint delivers 8,000 square feet of clear-span interior space for mid-size warehouses, fleet garages, agricultural processing, commercial storage, and light manufacturing operations. Configure every option below in our 3D builder, or work with our commercial advisors for code-stamped engineered drawings.
| Building Footprint | 80′ Wide × 100′ Longwith leg heights from 14′ to 20′, clear-span throughout for open warehouse or operations use |
|---|---|
| Total Square Footage | 8,000 square feetof usable commercial, agricultural, or industrial floor space |
| Building Configurations | Commercial warehouse, distribution storage, manufacturing bay, fleet garage, agricultural processing, indoor sports facility, equipment dealership, municipal storageAll Available |
| Enclosure Options | Fully enclosed 4-wall configuration is standard for commercial use. Open shelter, partial enclosure, and lean-to additions are configurable for agricultural, fleet, and equipment storage layouts |
| Roof Styles | Vertical Roof is recommended for the 100-foot building length and commercial water runoff. A-Frame Horizontal is available for aesthetic builds. Regular Roof is not recommended for this footprint. |
| Roof Pitch Options | Standard 4:12 pitch on 80×100 builds, with 5:12 and 6:12 upgrades for snow regions, plus engineered low-pitch commercial options when required |
| Frame Gauge | 12-gauge primary tubing standard, 14-gauge secondary framing, with red iron I-beam upgrades available for mezzanines, crane systems, rooftop equipment, and industrial point loads |
| Roof & Wall Panels | 26-gauge sheet metal panels standard at this commercial scale. Insulated metal panels, standing-seam roofing, and architectural wall panel upgrades available |
| Door Options | Roll-up doors from 10’x10′ up to 20’x20′, sliding doors, hydraulic one-piece doors, dock-leveler-ready openings, storefront entries, and 4’x7′ personnel doors |
| Window Options | 36″x36″, 48″x48″, clerestory windows, storefront-style glazing, insulated Low-E glass, and skylights for daylighting compliance |
| Color Options | 17 colors for roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, White |
| Wind Rating | 140 MPH wind rating standard at this size, with engineered upgrades certified to 170+ MPH for hurricane, coastal, and high-exposure regions |
| Snow Load | 40 PSF snow load standard, with engineered upgrades to 80+ PSF for mountain regions, Great Lakes regions, and high ground-snow zones |
| Certification | Recommended for all 80×100 commercial and industrial builds. Engineered, wet-stamped drawings can meet IBC, IRC, NEC, IFGC, IECC, and IMC code requirements |
| Anchoring | Engineered concrete footings recommended. Anchor bolt patterns are delivered with foundation drawings, and slab spec scales with soil bearing, use case, and load requirements. |
| Free Delivery | Included on every orderin the 48 continental US states |
| Free Installation | Free delivery to all 48 contiguous states. Installation on larger commercial, red iron, or complex certified builds is bid separately by our certified crew network and varies by region. |
| Lead Time | 6 to 8 weeks from order confirmation. Commercial and engineered structures fabricate to order; peak seasons or complex options may extend scheduling. |
| Installation Time | 4 to 8 days for most 80×100 commercial configurations, with longer windows for mezzanines, dock systems, complex door arrays, or insulated metal panel packages |
| Warranty | 20-year rust-through warranty plus 90-day workmanship guarantee |
Limited + Product Pledge
Paint Finish
Workmanship Guarantee
Workmanship Guarantee
12 Commercial 80×100 Metal Building Uses (8,000 Sq Ft Operations)
An 8,000 square foot 80×100 prefab steel building fits mid-size warehouse, fleet, agricultural, municipal, manufacturing, and distribution needs. Filter by use category and price your custom configuration in minutes.
80×100 Fleet Garage / Vehicle Operations
8,000 sq ft fleet garage for 24 to 36 work trucks, service vans, utility trailers, municipal vehicles, or contractor equipment. Multiple 12×14 or 14×14 roll-up doors keep daily dispatch organized.
80×100 Manufacturing Floor
Column-free 8,000 sq ft production floor for CNC equipment, fabrication, assembly lines, conveyors, robotic cells, pallet staging, and light industrial workflows.
80×100 Distribution Hub
Mid-size logistics layout with dock-leveler-ready openings, drive-through bay options, staging space, and forklift-friendly clear height for pallet racking and inventory movement.
80×100 Commercial Showroom / Retail
Vehicle, equipment, RV, boat, or building-material showroom with 8,000 sq ft of customer-facing floor space. Add storefront glazing, office partitions, branded trim, and HVAC-ready framing.
80×100 RV / Boat Dealership Inventory
Indoor inventory floor for travel trailers, fifth wheels, boats, ATVs, UTVs, and recreational equipment. Tall doors and 18′ to 20′ legs allow easy movement of larger inventory.
80×100 Athletic Facility / Indoor Sports
8,000 sq ft indoor sports space for batting cages, practice courts, strength training, cheer, wrestling, pickleball, indoor turf lanes, or multi-use recreation programs.
80×100 Agricultural Processing Facility
Hay storage, grain handling, dairy support, cold storage, equipment parking, feed processing, or wash-down agricultural operations under a heavy-duty galvanized steel structure.
80×100 Trucking Terminal
Regional cross-dock, service bay, or trucking support facility with dock-ready openings, drive-through access, clear truck routes, and space for a front office partition.
80×100 Warehouse / Inventory Storage
8,000 sq ft high-bay warehouse for pallet racking, bulk inventory, parts storage, contractor supplies, or distribution staging. Clear-span width keeps forklift routes open.
80×100 Municipal / Government Facility
Public works storage, fleet staging, emergency response storage, parks department equipment building, or municipal maintenance facility with stamped engineered drawings.
80×100 Indoor Riding Arena
Mid-size indoor arena or equestrian training building with high clearance, kickwall-ready layout, ventilation, tack-room options, and lean-to additions for stalls or equipment.
80×100 Worship Center / Fellowship Hall
8,000 sq ft column-free interior for worship seating, fellowship meals, classroom partitions, youth programs, or community events with insulation and HVAC-ready framing.
Need engineered drawings, dock layouts, mezzanine framing, or commercial storage specs on your 80×100? Our commercial advisors design and price it free.
What’s Included in an 80×100 Metal Building Kit?
Every 80×100 prefab steel building kit ships with primary framing, secondary purlins and girts, sheet metal, fasteners, trim, and commercial-grade hardware. Free curbside delivery is included on every order; commercial installation is bid separately for larger or red iron builds.
Standard With Every 80×100 Metal Building Order
Everything you need ships free with no hidden fees
- 12-gauge primary tubing + 14-gauge secondary80′ x 100′ footprint with leg height of your choice from 14′ to 20’+
- Vertical Roof recommendedA-Frame Horizontal also available; Vertical Roof is recommended for runoff over the 100-foot length
- 26-gauge sheet metal panelsRoof and walls in your color choice; insulated metal panel upgrades available for conditioned commercial interiors
- 17 color optionsPick roof, walls, and trim colors independently from 17 standard metal building colors
- Engineered purlins, girts, and bracingSecondary framing engineered for the 80-foot clear-span width and 100-foot building length
- All hardware includedFasteners, color-matched screws, sealing strips, brackets, bolts, trim hardware, and connection components
- Painted flashings, trim, ridge capsColor-matched to your panel choices; 20-year paint warranty on painted exterior surfaces
- Anchor bolt patternsEngineered anchor layouts delivered with foundation drawings when certified engineering is selected
- FREE delivery to all 48 statesCurbside delivery to your install address; no hidden freight charges on the steel package
- Engineered drawings availableWet-stamped drawings can be prepared to IBC, IRC, NEC, IFGC, IECC, IMC, and local jurisdiction requirements
- 20-year rust-through warrantyPlus 90-day workmanship guarantee on framing and assembly
+ Popular 80×100 Building Upgrades & Add-Ons
Optional add-ons to spec your 80×100 commercial building for warehouse, industrial, agricultural, institutional, or retail use
- Red iron beam upgradeHot-rolled red iron primary frame for crane bridges, mezzanines, and rooftop equipment loads beyond tubular capacity
- Heavier gauge primary framingEngineered W-shape and red iron options for industrial loads, equipment support, mezzanines, and overhead crane systems
- Standing-seam or IMP panelsStanding-seam roof panels and insulated metal panel walls for office, retail, or temperature-controlled commercial use
- Certified / engineered drawingsWet-stamped plans with foundation drawings, anchor patterns, and code calculations for commercial occupancy
- Higher wind and snow ratingsUp to 170+ MPH wind and up to 80+ PSF snow load for hurricane, coastal, mountain, and heavy-snow regions
- Commercial roll-up and dock doors10’x10′ to 20’x20′ roll-up doors, hydraulic one-piece doors, dock-leveler-ready openings, and high-speed rapid-roll doors
- Storefront entries and double doors4’x7′ commercial double doors, full-glass storefront entries, ADA-compliant thresholds, and retail-ready entry systems
- Storefront and clerestory windows36″x36″, 48″x48″, clerestory bands, full-height storefront glazing, and insulated Low-E glass
- Commercial insulation packagesFiberglass batt, spray foam, insulated metal panels, vapor barriers, and conditioned-space insulation systems
- WainscotingTwo-tone lower wall panels for branded curb appeal, dock-side durability, or dealership-style exterior design
- Lean-to additionsLong-side lean-tos for trailer staging, raw material storage, outdoor equipment, dock coverage, or farm use
- Taller leg heightsUp to 20’+ standard and 24′ on engineered request for racking, fifth-wheel inventory, mezzanines, and overhead clearance
Customize & Spec Your 80×100 Metal Building Online
Every option below is selectable in our 3D builder or your custom commercial quote. The 80×100 footprint is fixed. Roof, leg height, gauge, doors, dock systems, insulation, colors, and finishes are configurable to your operation.
Leg Height (14′ to 20’+)
On an 80×100, leg height runs 14′ to 20′ standard and 24′ on engineered request. Warehouse operations usually land at 16′ to 18′ for pallet racking. RV inventory, trucking, and equipment storage often require 18′ to 20’+ for overhead clearance.
3 Roof Styles
Vertical Roof is the standard recommendation for an 80×100 build because the 100-foot length needs reliable runoff. A-Frame Horizontal is available for aesthetic or brand-matched builds. Regular Roof is not recommended for this commercial footprint.
Roof Pitch & Slope
Standard 4:12 roof pitch on 80×100 builds, with 5:12 and 6:12 upgrades for snow regions. Low-pitch engineered commercial roofing options are available for specific architectural, industrial, or municipal requirements.
Frame Gauge (14 or 12)
12-gauge primary tubing is standard at this scale, with 14-gauge secondary purlins and girts. Red iron I-beam primary framing is available for industrial loads, overhead cranes, mezzanines, rooftop HVAC, and high-load commercial designs.
Sheet Metal Gauge (29 or 26)
26-gauge sheet metal panels are standard for most 80×100 roof and wall systems. Insulated metal panels replace standard panels for office, retail, food-grade, climate-controlled, or energy-code-driven commercial use.
Certification & Engineering
Engineering is recommended for every commercial 80×100 structure. Wet-stamped drawings, foundation plans, wind/snow calculations, and local code packages can be prepared for your municipal plan reviewer.
Roll-Up Garage Doors
Roll-up doors from 10’x10′ up to 20’x20′ are available. Fleet garages often use multiple 12’x14′ or 14’x14′ doors. Distribution and trucking layouts can include dock-ready openings, drive-through bays, and opposing-wall doors.
Walk-In Doors
4’x7′ commercial double doors, 36″ personnel doors, crash-bar exits, ADA-compliant thresholds, insulated doors, and non-insulated doors are available. Plan front entry and emergency exits based on your occupancy and fire code.
Hydraulic & Rapid Doors
Hydraulic one-piece doors and high-speed rapid-roll doors are available for commercial 80×100 buildings where door cycles, equipment access, or distribution throughput require upgraded entry systems.
Windows & Skylights
36″x36″ or 48″x48″ insulated windows, full-height storefront entries, clerestory bands, and skylights can be added for retail, office, warehouse, athletic, or institutional use.
Framed Openings
Order framed openings for future dock additions, HVAC penetrations, electrical service entrances, overhead doors, intake vents, exhaust fans, or expansion phases. Pre-framing avoids field cutting later.
Garage Door Openers & Windows
Commercial chain-hoist openers, smart access systems, Wi-Fi controls, fleet-management integrations, loading dock seal kits, dock bumpers, and roll-up door window kits are available.
17 Standard Color Options
All 17 standard color options are available on the 80×100: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White.
Mix-and-Match Roof, Walls, Trim
Mix roof, wall, and trim colors independently. Common 80×100 pairings include Galvalume roof with brand-color walls, Pewter Gray walls with Black trim, or White walls with darker wainscot panels for a clean commercial exterior.
Wainscoting (Two-Tone Walls)
Wainscoting on an 80×100 typically uses the lower 4′ to 5′ of the wall in a contrasting color. It improves curb appeal, hides dock-side wear, and helps separate customer-facing elevations from service areas.
Galvalume (Bare Metal Finish)
Galvalume is a hot-dipped aluminum-zinc coating with no paint. It is cost-effective, corrosion-resistant, and popular for warehouse, agricultural, industrial, and rural commercial applications.
Painted Trim & Flashings
Color-matched ridge caps, eave trim, gable trim, corner trim, and rake trim ship with every 80×100. All hardware, including color-coded screws, can match your selected panels.
Custom Color Match
Custom paint matching is available for corporate brand colors, franchise standards, municipal palettes, or institutional requirements. Ask your commercial advisor for sample chips before final approval.
Insulation Options
Insulation packages scale to occupancy. Single-bubble radiant barrier works for unconditioned storage. Fiberglass batt, spray foam, or insulated metal panels support offices, retail, athletic facilities, temperature-controlled storage, and manufacturing use.
Lean-To Additions
Lean-to additions on an 80×100 often run 20′ to 30′ wide along one or both long walls. Use them for trailer staging, raw material storage, outdoor equipment, dock coverage, or agricultural side shelter.
Mezzanines & Lofts
Mezzanines and partial second floors are common on 80×100 builds. Add office mezzanines, parts storage platforms, break rooms, locker areas, or elevated inventory space with engineered live and dead load calculations.
Interior Partitions
Interior partitions divide the 8,000 sq ft floor into offices, bays, restrooms, locker rooms, mechanical rooms, secure storage, and operations zones. Steel-stud framing and insulated metal interior panels are available.
Trim, Anchors, Gables
Decorative trim, branded gables, full-color trim packages, storefront entries, and parapet-style elements can help the 80×100 match your brand, municipality, dealership, or existing facility.
Flooring Prep
We do not pour foundations, but we coordinate with your structural engineer on slab requirements. An 80×100 typically needs a reinforced concrete slab and engineered footings based on soil, column reactions, dead load, live load, and intended use.
Wind & Snow Certification
Standard 140 MPH wind and 40 PSF snow load are common at this commercial scale. Engineered upgrades can reach 170+ MPH wind for coastal zones and 80+ PSF snow load for mountain or heavy-snow regions.
Permit-Ready Drawings
Wet-stamped engineered drawings, foundation plans, anchor patterns, and code calculations are available. Packages can meet IBC, IRC, NEC, IFGC, IECC, IMC, and state-specific commercial amendments.
Door Locks & Access Control
Smart access control, keypad entry, badge readers, biometric locks, Knox-box fire access, auto-lock systems, and facility-management integrations are available for commercial 80×100 buildings.
Fire Safety & Alarms
Sprinkler-ready framing, heat and smoke detection, addressable fire alarm systems, emergency exit signage, fire-rated partitions, and extinguisher layouts can be specified for commercial occupancy.
Anchoring System
Engineered concrete footings with anchor bolt patterns are matched to wind, seismic, frost, and soil conditions. Pier-and-beam options are available for poor soil or expansive clay sites.
Solar & Roof-Top Loads
Engineered framing can support rooftop solar arrays, HVAC condenser units, exhaust equipment, antennas, and other rooftop loads. Reinforced roof framing should be specified before fabrication.
80×100 Metal Building Codes, Permits & Engineering
Every 80×100 prefab steel building can be engineered, stamped, and certified to meet local building codes. Commercial, industrial, institutional, and agricultural buildings at this scale usually require permit-ready drawings and site-specific load calculations.
We also follow plumbing codes, energy conservation standards, ADA requirements, fire-code requirements, and any state or local commercial occupancy rules. Code compliance is integrated during the engineering and foundation drawing phase.
How to Maintain an 80×100 Metal Building
Quarterly facility walks on an 80×100 take 30 to 60 minutes. Routine inspection of seals, anchors, roof drainage, doors, and exterior panels keeps your 8,000 sq ft commercial steel building structurally sound and warranty-ready.
What Can You Do with 8,000 Square Feet?
An 80×100 metal building gives you commercial-scale clear-span space for warehouse, fleet, agricultural, manufacturing, institutional, and high-bay storage operations
Fleet Garage
Park work trucks, vans, trailers, municipal vehicles, or service equipment in one engineered clear-span building
Manufacturing Floor
Run assembly, fabrication, CNC equipment, conveyors, parts storage, and industrial workflows
Warehouse Storage
Use the 8,000 sq ft high-bay footprint for pallet racking, inventory staging, and bulk storage
Commercial Showroom
Create a retail, RV, boat, equipment, auto, or contractor showroom with storefront-ready options
Distribution Storage
Spec dock-ready openings, trailer staging, drive-through doors, and clear forklift routes
Indoor Sports Facility
Fit training lanes, courts, batting cages, turf practice, gym space, or multi-use recreation programs
Agricultural Processing
Shelter grain, hay, feed, dairy support, cold storage, tractors, combines, or farm equipment
High-Bay Storage
Use 14′ to 20’+ leg heights for racking, mezzanines, dock systems, RV inventory, or equipment clearance
3 Ways to Order Your 80×100 Metal Building
Spec your 80×100 in our 3D builder, request a free custom commercial quote, or talk directly with a commercial building advisor. Reservation deposits accommodate business procurement; balance terms scale to project scope.
Request Free 80×100 Quote
Free custom design, reply within 24 hours
Tell us your operational requirements and our commercial 80×100 advisors will design and price your custom steel building for free. This is the best path for permitted commercial builds requiring engineered drawings, dock layouts, insulation, or code compliance.
- Free expert design consultation
- Permit and certification handled for you
- Custom layout and engineered drawings
- Quote delivered within 1 business day
Free quote. Flexible deposit to reserve after approval.
Spec Your 80×100 in 3D
Design your 80×100 yourself, see live pricing
Use our interactive 3D commercial building builder to spec every detail of your 80×100. Pick configuration, roof style, leg height, door array, insulation, color package, certification, and commercial options.
- Visual 3D customization tool
- Live pricing as you customize
- Reserve your build with flexible deposit
- Balance due only after installation
Free tool. Flexible deposit to reserve your build.
Talk to an 80×100 Commercial Advisor
Fastest answers, call or chat now
Speak directly with a commercial building advisor who specializes in 80×100 structures. Get pricing, permit guidance, dock layout recommendations, foundation coordination, and configuration help for your exact operation.
- Instant answers over the phone
- Expert advice on permits, codes, and sizing
- Walk-through of customization options
- Mon to Fri 8am to 6pm PST, Sat 9am to 3pm
Toll-free. Speak with an expert now.
How the 3D Builder Works
Design your ideal 80×100 commercial metal building in minutes
1. Launch Builder
Open the builder in a new tab so you can keep this page available while designing.
2. Configure Your Building
Set size, roof style, certification, colors, doors, side panels, dock systems, insulation, and commercial options.
3. Save Your Design
Copy your configuration code or summary before returning to this product page.
4. Complete Your Request
Send us your final configuration and we will confirm pricing, engineering, scheduling, and installation details.
Ready to design your custom 80×100 metal building?
Tip:Keep this page open so you can return and submit your final configuration with ease.
How Much Does an 80×100 Metal Building Cost?
Commercial pricing on every 80×100 prefab steel building. An 80×100 commercial certified shell starts around $38,500. A fully enclosed warehouse or fleet garage runs from $42,500 to $52,000. Manufacturing-grade red iron, dock-equipped distribution layouts, insulated panels, and mezzanines can reach $135,000+ depending on configuration.
Building Configuration
An 80×100 commercial shell is the entry point. Adding dock systems, office partitions, red iron framing, insulation, storefront glazing, or mezzanine framing increases the price based on complexity and material scope.
Your Location
Delivery distance, state-specific commercial code requirements, wind exposure, snow load, foundation requirements, and local labor rates affect final 80×100 pricing. Coastal and energy-code-heavy regions may require additional upgrades.
Steel Gauge
12-gauge primary tubing is standard for most 80×100 commercial builds. Red iron I-beam framing is recommended for crane bridges, mezzanines, heavy rooftop loads, or high-load industrial operations.
Roof Style & Pitch
Vertical Roof is recommended on the 80×100. A-Frame Horizontal may be selected for appearance. Standing-seam roofing and pitch upgrades add cost but can improve aesthetics, energy-code performance, and snow handling.
Certification
Certified engineering with wet-stamped drawings, foundation plans, and anchor patterns is usually required for commercial 80×100 projects. FEMA, OSHA, public-bid, and special occupancy upgrades may add to the engineering cost.
Doors, Windows, Insulation
Door arrays are a major pricing variable. Commercial roll-up doors, dock systems, storefront glazing, clerestory windows, insulated metal panels, and HVAC-ready insulation packages can significantly change the final price.
80×100 Metal Building Complete Price Range
Range covers a commercial-certified shell at the low end through a fully outfitted 80×100 industrial or warehouse build with red iron primary framing, multiple commercial roll-up doors, dock-ready openings, insulation, office partitions, mezzanine framing, and stamped engineered drawings.
Flexible Financing & Commercial Payment Options
Choose the payment path that fits your commercial project and budget
Traditional Financing
Credit Check Required
- Finance your metal building project
- Structured monthly payment options
- Terms based on lender approval
- Fast online application process
- Ownership from day one
Commercial Payment Options
Project Based
- Procurement-friendly deposit schedules
- Project-based commercial payment terms
- Structured around fabrication and install milestones
- Great for large commercial buildings
- Advisor support for quote documentation
How Delivery & Installation Works
A simple step-by-step process for getting your 80×100 commercial metal building engineered, delivered, and installed
Place Your Order
Submit your request for the 80×100 configuration and confirm use case, door array, insulation, certification, foundation, colors, and site details.
Step 1
Engineering & Production Scheduling
Your order moves through engineered drawings, code review, fabrication scheduling, and production based on your final 80×100 specification.
Step 2
Prepare the Site
Prepare the engineered concrete foundation, confirm truck access, review crane or lift needs, and make sure utilities and staging areas are ready before the crew arrives.
Step 3
Installation Day
Our certified commercial crew installs the 80×100 metal building and verifies layout, anchoring, door placement, roof system, trim, and exterior finish details.
Step 4
What real 80×100 Metal Building buyers say.
No reviews yet for the 80×100 Metal Building
Be the first verified buyer to share your experience. Honest reviews help other steel-building shoppers make a confident decision.
Be the first to review the 80×100 Metal Building
No reviews yet. Your honest review helps other steel-building shoppers make a confident decision.
Compare 80×100 vs. Other Metal Building Sizes
Considering a different industrial or commercial footprint? Compare steel building sizes side by side. Every order ships free to 48 states, and engineered drawings are available for commercial configurations.
| Feature | 60×100 Building | 80×100 Building | 100×100 Building | 100×150 Building |
|---|---|---|---|---|
| Square Footage | 6,000 SF | 8,000 SF | 10,000 SF | 15,000 SF |
| Use Capacity | Small commercial | Mid-size warehouse or fleet building | Large commercial operations | Large distribution |
| Access Potential | Very Good | Excellent | Excellent | Maximum |
| Roof Style | Vertical Recommended | Vertical Recommended | Vertical Standard | Vertical / Customizable |
| Best For | Small warehouse | 8,000 sq ft commercial flexibility | 10,000 sq ft warehouse | Large distribution |
| View 60×100 | You’re Here | Price 100×100 | Spec 100×150 |
80×100 Metal Building FAQ: Cost, Permits, Sizes & Install
Answers on commercial pricing, configurations, leg heights, roof systems, code compliance, foundations, and load ratings for the 8,000 sq ft 80×100 prefab commercial steel building.
Request Your Custom Design & Quote
Tell us about your project and we’ll provide a custom design with exact pricing. No obligation, no pressure just helpful information to guide your decision.
🔒 A specialist calls within 1 business day. We never share your details.
Customize Other Metal Building Sizes
Nearby width and length variants across our full metal building lineup — buildings, carports, garages, barns, and RV covers.
75x100 Metal Buildings | 7,500 Sq Ft Steel Kits
80x80 Metal Building Kits Built for Commercial Use
100×100 Fleet Garage / Vehicle Operations
100x100 Metal Building
60x100 Metal Building
100×100 Distribution Hub
100×100 Commercial Showroom / Retail
100×100 RV / Boat Dealership Inventory
100×100 Athletic Facility / Indoor Sports
100×100 Agricultural Processing Facility
100×100 Trucking Terminal
