1/5
2/5
3/5
4/5
5/580×120 Fabrication Shop, engineered for code-compliant business use.
Metal fabricators and welding shops need crane runways, high eaves, and reinforced framing for overhead loads. The 80×120 supports parallel crane rails the full 120' length, with stamped engineering for a 5-10 ton.
🔧 Customize your build 9 options affect your price▼
- 9,600 sq ft enclosed
- 12 GA Frame
- Crane Rail Mounts
- Reinforced Roof
- 180 mph wind certified
- 65 psf snow load
- 20-year rust warranty
- Free delivery + install
See how 9,600 sq ft fits your 80x120 fabrication shop.
80 feet wide × 120 feet long. Metal fabricators and welding shops need crane runways, high eaves, and reinforced framing for overhead loads.
Fabrication Shop layout.
Metal fabricators and welding shops need crane runways, high eaves, and reinforced framing for overhead loads. The 80×120 supports parallel crane rails the full 120' length, with stamped engineering for a 5-10 ton capacity bridge. 12-gauge frame upgrade standard for crane builds.
Build your 80×120 Fabrication Shop in 3D.
Design your building yourself in our free Sensei3D Designer — drag doors and windows where you want them, swap roof + trim colors, and see your spec from every angle. Save your design and email it to yourself for later.
- Drag-and-drop doors, windows, walk-ins anywhere on the building
- 16 colors applied live to roof, walls, and trim — mix & match
- Interior + exterior views of your spec, with measurements
- Save your design and share it with your contractor or family
- Auto-syncs to quote — what you build is what we price
Everything in your Fabrication Shop.
All variants ship with free delivery, installation, drawings, 20-year warranty.
Fabrication Shop spec sheet.
How real buyers use Fabrication Shop.
80×120 Fabrication Shop — what makes it different.
Engineered for your county
Every 80×120 fabrication shop is fabricated from American-rolled galvanized steel and engineered against the exact wind and snow loads your jurisdiction requires.
- Standard: 140 mph wind / 35 psf snow
- 12-ga upgrade: 180 mph / 65 psf
- Permit drawings stamped and emailed free
Construction details
The same materials commercial fabricators use — not residential-grade. Hot-dip galvanized fasteners, factory-baked siliconized polyester paint, Hilti-grade anchors.
- Frame: 14-ga (12-ga upgrade) galvanized tubing
- Panels: 29-ga G-90 (26-ga upgrade)
- Fasteners: #14 self-drilling with EPDM washer
Free delivery & install — really free
Regional-route delivery plus 1–2 day on-site installation by a certified crew, bundled into your headline price. No hidden unloading fees, fuel surcharges, or site-prep charges.
- $0 deposit · pay only after walkthrough sign-off
- 3–5 week lead time on regional routes
- All 48 states · rush option available
Warranty & lifespan
Engineered for a 50-year service life with industry-leading warranties on every wear surface.
- 20-yr rust-through warranty on frame & panels
- 40-yr paint warranty against fading + chalking
- 1-yr craftsmanship on installation
$0-down financing
Three financing paths to fit any credit situation. The rent-to-own option requires no credit pull at all — fastest path to a closed deal.
- RTO: $3699/mo, no credit check, 36–60 mo
- Financing: 0% promo APR · 84 mo term
- Cash discount: 4% on $10K+ orders
Why 80×120?
9,600 sq ft sits in the sweet spot for residential and light-commercial — fits standard quarter-acre setbacks, comfortably below the 1,000 sq ft municipal threshold that triggers extra inspections.
- 80′ × 120′ footprint with 9,600 sq ft interior
- Permit-friendly in 96% of US counties
- Resale ROI $76,800–$115,200 added home value
Common questions from Fabrication Shop shoppers.
The questions our team hears every week. Click any to expand the short answer.
How thick is the steel on a Steel and Stud 80×120 metal building?
Standard frame: 14-gauge (1.5 mm) galvanized tubing. Optional 12-gauge upgrade (2.5 mm) for high-wind/snow zones. Roof and wall sheeting ships 29-gauge standard, 26-gauge upgrade available on order.
Does Steel and Stud deliver and install in my state?
Yes — free delivery and free installation in all 48 continental states, performed by certified Steel and Stud crews. Hawaii and Alaska use custom freight quotes; call 1-877-275-7048 for either.
What's the typical lead time for a 80×120 building?
Standard: 3–5 weeks from order confirmation to install completion. Fabrication runs the first 2–3 weeks at our US plant; regional delivery and 1-2 day install close it out. Rush builds available for $345.
Can I finance a Steel and Stud building without a credit check?
Yes — Steel and Stud's rent-to-own partner does not pull credit. Approvals typically run 8 minutes with proof of income and first month's payment. 36–60 month terms, no early-payoff penalty.
What's covered under the 20-year warranty?
Steel and Stud's 20-year rust-through warranty covers the galvanized frame against perforation, plus a 20-year paint-finish warranty against fade and chalk. Workmanship on the install is warrantied for 1 year. Warranty transfers to the next owner on resale.
What real 80×120 Fabrication Shop buyers say.
No reviews yet for the 80×120 Fabrication Shop
Be the first verified buyer to share your experience. Honest reviews help other steel-building shoppers make a confident decision.
✍ Write the first reviewBe the first to review the 80×120 Fabrication Shop
No reviews yet. Your honest review helps other steel-building shoppers make a confident decision.
Talk to a real metal-building specialist.
Our team has installed 15,000+ buildings. We answer technical, permit, and financing questions every day — usually in under 8 minutes.
Complete your Fabrication Shop · Save 10% bundled
These add-ons ship and install with the same crew.
Buyers who chose Fabrication Shop also viewed:
Clear-Span Warehouse
80×120 clear-span warehouse configuration — free delivery, free installation, 20-year warranty.
Distribution Center
80×120 distribution center configuration — free delivery, free installation, 20-year warranty.
Manufacturing Facility
80×120 manufacturing facility configuration — free delivery, free installation, 20-year warranty.
Aircraft Hangar
80×120 aircraft hangar configuration — free delivery, free installation, 20-year warranty.
Cold Storage Building
80×120 cold storage building configuration — free delivery, free installation, 20-year warranty.
Equipment Barn
80×120 equipment barn configuration — free delivery, free installation, 20-year warranty.
Indoor Riding Arena
80×120 indoor riding arena configuration — free delivery, free installation, 20-year warranty.
Commercial Workshop
80×120 commercial workshop configuration — free delivery, free installation, 20-year warranty.
Industrial Steel Building
80×120 industrial steel building configuration — free delivery, free installation, 20-year warranty.
Shop House / Barndominium
80×120 shop house / barndominium configuration — free delivery, free installation, 20-year warranty.
Hay & Grain Barn
80×120 hay & grain barn configuration — free delivery, free installation, 20-year warranty.
Fabrication Shop questions, answered.
How much does a 80×120 fabrication shop cost?
A 80×120 fabrication shop from Steel and Stud starts at $177,550 with free delivery and free installation across all 48 states. Most buyers pick the rent-to-own option at about $3699/month with $0 down and no credit check. Call 1-877-275-7048 for a same-day price lock.
Is delivery and installation included in the 80×120 fabrication shop price?
Yes — every Steel and Stud fabrication shop ships with free delivery + free installation by a certified crew, included in the listed price. Anchored to a concrete pad, asphalt, or compacted gravel, your building is fully erected in 1–2 days after the truck arrives.
Do I need a permit for a 80×120 fabrication shop?
Almost always for 9,600+ sq ft enclosed buildings. Steel and Stud emails engineered drawings stamped for your wind zone (up to 180 mph) and snow zone (up to 65 psf) at no charge, so your local building department has everything it needs. Permit timing typically runs 2–6 weeks by jurisdiction.
How is a Steel and Stud fabrication shop different from a wood-frame build?
Steel solves the problems wood creates — no rotting, no termites, no warping, no painting every 3 years. Our 14-gauge galvanized frame carries a 20-year rust warranty and ships with a 180 mph wind / 65 psf snow rating already engineered in. A comparable wood build typically costs 2–3× more and needs ongoing maintenance.
What foundation does a 80×120 fabrication shop need?
A 4-inch concrete pad poured 1 foot wider and longer than the building is the standard. Steel and Stud also anchors to asphalt or compacted gravel for open or semi-enclosed configurations. A pad-pour bundle is offered at checkout if you don't already have a slab.
How fast can I get a 80×120 fabrication shop delivered?
Standard lead time is 3–5 weeks from order to install. Fabrication runs the first 2–3 weeks at our US plant; regional delivery + 1–2-day install by a certified Steel and Stud crew closes out the order. Rush builds are available — call 1-877-275-7048 for current capacity.
Can I finance a 80×120 fabrication shop without a credit check?
Yes — Steel and Stud's rent-to-own partner does not pull credit. Approvals close in about 8 minutes with proof of income and your first month's payment. Terms run 36–60 months with no early-payoff penalty, and the monthly works out to roughly $3699/month on a 80×120 fabrication shop.
What warranty comes with the 80×120 fabrication shop?
Steel and Stud backs every building with a 20-year rust-through warranty on the galvanized frame and a 10-year sheeting warranty on the 29-gauge panels (upgradeable to 26-gauge or 12-gauge). Workmanship on the install is warrantied for 1 year. Full warranty terms ship with your order packet.
Can I customize the 80×120 fabrication shop in 3D before I order?
Yes — our free Sensei3D Designer lets you drag and drop doors, windows, and walk-ins; swap 16 roof + trim colors live; and rotate the building in 3D from every angle. No login required. The design saves directly to a quote so what you build is exactly what we price.
Does the 80×120 fabrication shop meet IBC commercial code?
Yes. Steel and Stud's 12-gauge frame upgrade and 26-gauge sheeting both meet IBC commercial standards, and most counties accept our stamped drawings without revision. Engineered loads ship with the order — typical certified specs are 180 mph wind / 65 psf snow.
Your Fabrication Shop quote takes one minute.
Tell us your zip and the options you want. We'll send back a same-day, all-in price.
