1/5
2/5
3/5
4/5
5/522×35 Metal Workshop with 220V, built for daily backyard use.
Tradespeople and serious hobbyists use the full 770 sq ft as a dedicated shop. The 22-ft clear span hangs a 12-ft welding bench plus a table saw outfeed without a center post. Spec a 22×35 roll-up on the gable end and.
🔧 Customize your build 9 options affect your price▼
- 770 sq ft enclosed
- 12 GA Frame
- Vertical Roof
- 12x12 Roll-Up
- 180 mph wind certified
- 65 psf snow load
- 20-year rust warranty
- Free delivery + install
See how 800 sq ft fits your 22x35 metal workshop with 220v.
22 feet wide × 35 feet long. Tradespeople and serious hobbyists use the full 770 sq ft as a dedicated shop.
Metal Workshop with 220V layout.
Tradespeople and serious hobbyists use the full 770 sq ft as a dedicated shop. The 22-ft clear span hangs a 12-ft welding bench plus a table saw outfeed without a center post. Spec a 22×35 roll-up on the gable end and you can roll a project car straight onto the slab.
Build your 22×35 Metal Workshop with 220V in 3D.
Design your building yourself in our free Sensei3D Designer — drag doors and windows where you want them, swap roof + trim colors, and see your spec from every angle. Save your design and email it to yourself for later.
- Drag-and-drop doors, windows, walk-ins anywhere on the building
- 16 colors applied live to roof, walls, and trim — mix & match
- Interior + exterior views of your spec, with measurements
- Save your design and share it with your contractor or family
- Auto-syncs to quote — what you build is what we price
Everything in your Metal Workshop with 220V.
All variants ship with free delivery, installation, drawings, 20-year warranty.
Metal Workshop with 220V spec sheet.
How real buyers use Metal Workshop with 220V.
22×35 Metal Workshop with 220V — what makes it different.
Engineered for your county
Every 22×35 metal workshop with 220v is fabricated from American-rolled galvanized steel and engineered against the exact wind and snow loads your jurisdiction requires.
- Standard: 140 mph wind / 35 psf snow
- 12-ga upgrade: 180 mph / 65 psf
- Permit drawings stamped and emailed free
Construction details
The same materials commercial fabricators use — not residential-grade. Hot-dip galvanized fasteners, factory-baked siliconized polyester paint, Hilti-grade anchors.
- Frame: 14-ga (12-ga upgrade) galvanized tubing
- Panels: 29-ga G-90 (26-ga upgrade)
- Fasteners: #14 self-drilling with EPDM washer
Free delivery & install — really free
Regional-route delivery plus 1–2 day on-site installation by a certified crew, bundled into your headline price. No hidden unloading fees, fuel surcharges, or site-prep charges.
- $0 deposit · pay only after walkthrough sign-off
- 3–5 week lead time on regional routes
- All 48 states · rush option available
Warranty & lifespan
Engineered for a 50-year service life with industry-leading warranties on every wear surface.
- 20-yr rust-through warranty on frame & panels
- 40-yr paint warranty against fading + chalking
- 1-yr craftsmanship on installation
$0-down financing
Three financing paths to fit any credit situation. The rent-to-own option requires no credit pull at all — fastest path to a closed deal.
- RTO: $236/mo, no credit check, 36–60 mo
- Financing: 0% promo APR · 84 mo term
- Cash discount: 4% on $10K+ orders
Why 22×35?
770 sq ft sits in the sweet spot for residential and light-commercial — fits standard quarter-acre setbacks, comfortably below the 1,000 sq ft municipal threshold that triggers extra inspections.
- 22′ × 35′ footprint with 770 sq ft interior
- Permit-friendly in 96% of US counties
- Resale ROI $6,160–$9,240 added home value
Common questions from Metal Workshop with 220V shoppers.
The questions our team hears every week. Click any to expand the short answer.
How thick is the steel on a Steel and Stud 22×35 metal building?
Standard frame: 14-gauge (1.5 mm) galvanized tubing. Optional 12-gauge upgrade (2.5 mm) for high-wind/snow zones. Roof and wall sheeting ships 29-gauge standard, 26-gauge upgrade available on order.
Does Steel and Stud deliver and install in my state?
Yes — free delivery and free installation in all 48 continental states, performed by certified Steel and Stud crews. Hawaii and Alaska use custom freight quotes; call 1-877-275-7048 for either.
What's the typical lead time for a 22×35 building?
Standard: 3–5 weeks from order confirmation to install completion. Fabrication runs the first 2–3 weeks at our US plant; regional delivery and 1-2 day install close it out. Rush builds available for $345.
Can I finance a Steel and Stud building without a credit check?
Yes — Steel and Stud's rent-to-own partner does not pull credit. Approvals typically run 8 minutes with proof of income and first month's payment. 36–60 month terms, no early-payoff penalty.
What's covered under the 20-year warranty?
Steel and Stud's 20-year rust-through warranty covers the galvanized frame against perforation, plus a 20-year paint-finish warranty against fade and chalk. Workmanship on the install is warrantied for 1 year. Warranty transfers to the next owner on resale.
What real 22×35 Metal Workshop with 220V buyers say.
No reviews yet for the 22×35 Metal Workshop with 220V
Be the first verified buyer to share your experience. Honest reviews help other steel-building shoppers make a confident decision.
✍ Write the first reviewBe the first to review the 22×35 Metal Workshop with 220V
No reviews yet. Your honest review helps other steel-building shoppers make a confident decision.
Talk to a real metal-building specialist.
Our team has installed 15,000+ buildings. We answer technical, permit, and financing questions every day — usually in under 8 minutes.
Complete your Metal Workshop with 220V · Save 10% bundled
These add-ons ship and install with the same crew.
Buyers who chose Metal Workshop with 220V also viewed:
Two-Car Detached Garage
22×35 two-car detached garage configuration — free delivery, free installation, 20-year warranty.
RV Cover with Storage Bay
22×35 rv cover with storage bay configuration — free delivery, free installation, 20-year warranty.
Hobby Farm Equipment Barn
22×35 hobby farm equipment barn configuration — free delivery, free installation, 20-year warranty.
Two-Stall Horse Barn
22×35 two-stall horse barn configuration — free delivery, free installation, 20-year warranty.
Detached Shop for Contractors
22×35 detached shop for contractors configuration — free delivery, free installation, 20-year warranty.
Garage + Man Cave Combo
22×35 garage + man cave combo configuration — free delivery, free installation, 20-year warranty.
She Shed Studio
22×35 she shed studio configuration — free delivery, free installation, 20-year warranty.
Small Fabrication Bay
22×35 small fabrication bay configuration — free delivery, free installation, 20-year warranty.
Hay & Implement Storage
22×35 hay & implement storage configuration — free delivery, free installation, 20-year warranty.
Self-Storage Annex
22×35 self-storage annex configuration — free delivery, free installation, 20-year warranty.
Volunteer Fire Apparatus Bay
22×35 volunteer fire apparatus bay configuration — free delivery, free installation, 20-year warranty.
Metal Workshop with 220V questions, answered.
How much does a 22×35 metal workshop with 220v cost?
A 22×35 metal workshop with 220v from Steel and Stud starts at $11,350 with free delivery and free installation across all 48 states. Most buyers pick the rent-to-own option at about $236/month with $0 down and no credit check. Call 1-877-275-7048 for a same-day price lock.
Is delivery and installation included in the 22×35 metal workshop with 220v price?
Yes — every Steel and Stud metal workshop with 220v ships with free delivery + free installation by a certified crew, included in the listed price. Anchored to a concrete pad, asphalt, or compacted gravel, your building is fully erected in 1–2 days after the truck arrives.
Do I need a permit for a 22×35 metal workshop with 220v?
Almost always for 770+ sq ft enclosed buildings. Steel and Stud emails engineered drawings stamped for your wind zone (up to 180 mph) and snow zone (up to 65 psf) at no charge, so your local building department has everything it needs. Permit timing typically runs 2–6 weeks by jurisdiction.
How is a Steel and Stud metal workshop with 220v different from a wood-frame build?
Steel solves the problems wood creates — no rotting, no termites, no warping, no painting every 3 years. Our 14-gauge galvanized frame carries a 20-year rust warranty and ships with a 180 mph wind / 65 psf snow rating already engineered in. A comparable wood build typically costs 2–3× more and needs ongoing maintenance.
What foundation does a 22×35 metal workshop with 220v need?
A 4-inch concrete pad poured 1 foot wider and longer than the building is the standard. Steel and Stud also anchors to asphalt or compacted gravel for open or semi-enclosed configurations. A pad-pour bundle is offered at checkout if you don't already have a slab.
How fast can I get a 22×35 metal workshop with 220v delivered?
Standard lead time is 3–5 weeks from order to install. Fabrication runs the first 2–3 weeks at our US plant; regional delivery + 1–2-day install by a certified Steel and Stud crew closes out the order. Rush builds are available — call 1-877-275-7048 for current capacity.
Can I finance a 22×35 metal workshop with 220v without a credit check?
Yes — Steel and Stud's rent-to-own partner does not pull credit. Approvals close in about 8 minutes with proof of income and your first month's payment. Terms run 36–60 months with no early-payoff penalty, and the monthly works out to roughly $236/month on a 22×35 metal workshop with 220v.
What warranty comes with the 22×35 metal workshop with 220v?
Steel and Stud backs every building with a 20-year rust-through warranty on the galvanized frame and a 10-year sheeting warranty on the 29-gauge panels (upgradeable to 26-gauge or 12-gauge). Workmanship on the install is warrantied for 1 year. Full warranty terms ship with your order packet.
Can I customize the 22×35 metal workshop with 220v in 3D before I order?
Yes — our free Sensei3D Designer lets you drag and drop doors, windows, and walk-ins; swap 16 roof + trim colors live; and rotate the building in 3D from every angle. No login required. The design saves directly to a quote so what you build is exactly what we price.
Does a 22×35 metal workshop with 220v add resale value to my home?
An enclosed 22×35 metal workshop with 220v typically adds $6,160–$9,240 in resale value per regional comp data, and most insurance carriers reduce premiums for indoor vehicle / equipment storage. Steel and Stud's 20-year rust warranty transfers to the next owner.
Your Metal Workshop with 220V quote takes one minute.
Tell us your zip and the options you want. We'll send back a same-day, all-in price.
