1-877-275-7048|Free delivery — 48 states|20-year warranty on 12ga

20×24 Metal Building

900 sq ft — triple wide carport for vehicles or equipment

30′ x 30′ x 10′
14 Gauge
Local Certification Available
The 20×24 steel building provides 480 sq ft suited for single garages, tool sheds, hobby workshops, and backyard utility enclosures. 12-gauge galvanized frame, vertical roof panels, and all-weather enclosed steel walls. Select overhead door count, walk-in door location, insulation package, and certified load ratings.
⚠ This product isn't available in . Choose another state or contact us.
Starting From $8,704.00
Base kit with free install. Final price depends on gauge, certifications, doors, and your location. Reservation deposit typically 10-30% based on your state and manufacturer - final balance due after installation is complete.

No card charged online · Specialist calls within 1 business day · 10–20% deposit by phone

20-Year Warranty
Free Install
10-20% Deposit
Financing Available
20′ × 24′
Footprint
480 SF
Floor Space
8′ to 16′
Leg Height
3 Styles
Roof Options
17 Colors
Roof, Wall, Trim
4 to 6 Wks
Lead Time

20×24 Metal Building Specs, Dimensions & Custom Options

The 480 sq ft 20×24 steel building footprint is a compact, practical size for 2-car garages, small workshops, backyard storage, RV covers, equipment shelters, and light commercial use. Configure every spec below in our free 3D builder to match your exact use case, budget, and local building codes.

Building Footprint 20′ Wide × 24′ Longwith leg heights from 8′ to 16′
Total Square Footage 480 square feet of usable interior or covered space
Building Configurations Metal carport, fully enclosed garage, small workshop, backyard storage building, RV cover, boat shelter, farm equipment coverAll Available
Enclosure Options Open carport, partially enclosed, fully enclosed with four walls, or custom side and end-wall configurations
Roof Styles Regular Roof (rounded corners), A-Frame Horizontal / Boxed Eave, or Vertical Roof recommended for snow and rain runoff
Roof Pitch Options Standard 3:12 pitch, with 4:12 pitch upgrade available for heavier snow regions or steeper residential aesthetics
Frame Gauge 14-gauge galvanized steel tubing standard, 12-gauge upgrade available for added strength and longer frame life
Roof & Wall Panels 29-gauge sheet metal standard, 26-gauge upgrade available for hail-prone, coastal, or higher-wear locations
Door Options Roll-up garage doors from 6’x6′ up to 10’x10′, 36″ walk-in doors, framed openings, and optional window placements
Window Options 24″x24″, 30″x30″, 36″x36″, or custom sizes with insulated glazing options
Color Options 17 colors for roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, White
Wind Rating 115 MPH standard, certified upgrades available for coastal, high-wind, and hurricane-prone regions
Snow Load 35 PSF standard, certified upgrades available for heavy snow regions
Certification Available for any 20×24 configuration with engineered, stamped drawings that meet IBC, IRC, NEC, IFGC, IECC, and IMC codes
Anchoring Concrete anchors, asphalt anchors, mobile home anchors, or auger anchors for ground installation, all included
Free Delivery Included on every order in the 48 continental US states
Free Installation Included on all tubular-frame 20×24 buildings. Custom commercial or red-iron builds may carry a separate install fee.
Lead Time 4 to 6 weeks from order confirmation, with seasonal scheduling variations by region
Installation Time Most 20×24 structures install in one day, depending on enclosure level and door package
Warranty 20-year rust-through warranty plus 90-day workmanship guarantee
20
Year
Frame Warranty
Limited + Product Pledge
20
Year
Sheet Metal Warranty
Paint Finish
90
Day
14-Gauge Frame
Workmanship Guarantee
90
Day
12-Gauge Frame
Workmanship Guarantee

12 Popular 20×24 Metal Building Uses (480 Sq Ft Layouts)

A 480 square foot prefab metal building is ideal for 2-car parking, compact workshops, backyard storage, RV protection, farm gear, and small business storage. Filter by use case below, then customize colors, doors, leg height, gauge, enclosure, and roof style in our free 3D builder.

What’s Included in a 20×24 Metal Building Kit?

Every 20×24 prefab steel building kit ships with the frame, panels, fasteners, trim, anchors, and standard hardware needed for installation. Free curbside delivery is included on every order, and free professional installation is included on tubular-frame buildings.

Free With Every 20×24 Metal Building Order

Everything you need ships free with no hidden fees

  • 14-gauge galvanized steel frame20′ x 24′ footprint with leg height of your choice from 8′ to 16′
  • Choice of 3 roof stylesRegular Roof, A-Frame Horizontal / Boxed Eave, or Vertical Roof for snow and rain runoff
  • 29-gauge sheet metal panelsRoof and sides in your color choice, with mix-and-match options
  • 17 color optionsPick roof, walls, and trim independently from 17 popular metal building colors
  • Galvanized purlins, girts, and bracingCold-formed steel secondary framing scaled to the 20×24 footprint
  • All hardware includedFasteners, color-matched screws, sealing strips, brackets, bolts
  • Painted flashings, trim, ridge capsColor-matched to your panel choices, 20-year paint warranty
  • Foundation-matched anchorsConcrete, asphalt, mobile home, or auger anchors based on your install surface
  • FREE delivery to all 48 statesCurbside delivery to your install address, no hidden freight charges
  • FREE installation on tubular buildingsMost carports, garages, barns, workshops, and storage buildings
  • 20-year rust-through warrantyPlus 90-day workmanship guarantee on labor and assembly

+ Popular 20×24 Building Upgrades & Add-Ons

Optional add-ons to configure your 20×24 prefab building exactly the way you want it

  • Side panel enclosureConvert a 20×24 open carport into a partially or fully enclosed garage or storage building
  • 12-gauge steel frame upgrade33% thicker tubing, recommended for high-wind regions, workshops, and commercial storage
  • 26-gauge sheet metal upgradeThicker panels for hail-prone regions and longer paint life
  • Certified / engineered drawingsStamped plans, foundation drawings, wet-stamped permit packages
  • Higher wind and snow ratingsCertified upgrades for coastal, hurricane, mountain, and heavy snow regions
  • Roll-up garage doorsSizes from 6’x6′ up to 10’x10′, ideal for vehicles, tools, mowers, and small equipment
  • Walk-in doors and framed openings36″ personnel doors, double doors, framed openings for windows or HVAC
  • Windows24″x24″, 30″x30″, 36″x36″, or custom window sizes with insulated glazing options
  • Insulation packagesSingle-bubble, double-bubble, fiberglass batt, spray foam, or insulated metal panels
  • WainscotingPremium two-tone lower wall panels in any of the 17 standard colors
  • Lean-to additionsCovered side areas for firewood, equipment, outdoor work areas, or farm storage
  • Taller leg heightsUp to 16′ for RVs, boats, lift clearance, and extra vertical storage

Customize & Build Your 20×24 Metal Building Online

Every option below is selectable in our free 3D builder or your custom quote. The 20′ x 24′ footprint stays the same. Roof style, leg height, gauge, doors, windows, color, enclosure, and insulation are all yours to choose.

Leg Height (8′ to 16′)

The 20×24 footprint stays fixed. Leg height is yours to choose. Carports start at 8′ to 9′. Garages and workshops typically use 9′ to 12′. RV, boat, and taller storage layouts can use 12′ to 16′ for extra clearance.

3 Roof Styles

Regular Roof is the most affordable option with rounded corners and horizontal panels. A-Frame Horizontal, also called Boxed Eave, gives a classic peaked look. Vertical Roof uses vertical panels and is recommended for snow, rain runoff, and long-term performance.

Roof Pitch & Slope

Standard 3:12 roof pitch on most 20×24 buildings. Upgrade to 4:12 pitch for heavier snow regions or a steeper residential look. Cool roof coatings are available for hot climates.

Frame Gauge (14 or 12)

14-gauge galvanized steel tubing comes standard, ideal for residential garages, carports, sheds, and workshops. Upgrade to 12-gauge for added strength in high-wind areas, commercial use, or long-term heavy-duty storage.

Sheet Metal Gauge (29 or 26)

29-gauge sheet metal panels are standard for roof and walls. Upgrade to 26-gauge in hail-prone regions, coastal climates, or when you want a thicker exterior skin and longer paint life.

Certification & Engineering

Certified buildings come with stamped engineered drawings, foundation details, and wind or snow load calculations matched to your local code. Recommended for permitted garages, commercial storage, and high-wind or snow regions.

Roll-Up Garage Doors

Roll-up garage doors from 6’x6′ up to 10’x10′ are available. A 20×24 garage commonly uses one 9’x7′, 10’x8′, or two smaller roll-up doors depending on whether you want single-bay or two-bay access.

Walk-In Doors

36″ personnel doors with full frames, weatherstripping, and locksets. Locate them on the side, front, or rear wall to match your workflow. Insulated and non-insulated options are available.

Hydraulic & Rapid Doors

Hydraulic and rapid doors are less common on a 20×24 but available for specialized commercial use. Most buyers choose standard roll-up doors for vehicles, tools, and equipment access.

Windows & Skylights

24″x24″, 30″x30″, or 36″x36″ windows add natural light to a 20×24 workshop, garage, or studio. Insulated glazing and custom framed openings are available.

Framed Openings

Need a future window, HVAC unit, vent, pet door, or custom access point? Order framed openings now to avoid cutting into panels later.

Garage Door Openers & Windows

Chain-drive, belt-drive, or smart Wi-Fi-enabled openers are available. Window kits for roll-up doors add daylight while keeping the building secure.

17 Standard Color Options

Choose from Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White.

Mix-and-Match Roof, Walls, Trim

Pick different colors for roof, wall panels, and trim. Popular 20×24 combinations include White walls with Black trim, Pewter Gray walls with Black roof, or Barn Red roof with White walls for a classic storage barn look.

Wainscoting (Two-Tone Walls)

Add wainscoting for a premium two-tone look. Lower wall panels in a contrasting color improve curb appeal and help protect high-contact wall areas around garages and workshops.

Galvalume (Bare Metal Finish)

Galvalume is a hot-dipped aluminum-zinc coating with no paint. It is cost-effective, corrosion-resistant, and works well for rural, agricultural, and utility storage buildings.

Painted Trim & Flashings

Color-matched ridge caps, eave trim, corner trim, gable trim, and rake trim finish the building cleanly. Color-coded screws match your panel choices.

Custom Color Match

Need to match your home, HOA requirement, garage, barn, or business color? Custom paint matching is available for an upcharge. Ask your building advisor for sample options.

Insulation Options

Single-bubble radiant barrier, double-bubble insulation, fiberglass batt, spray foam, or insulated metal panels can be added. Insulation is recommended for workshops, studios, hobby rooms, and enclosed garages.

Lean-To Additions

Add a lean-to on one side of your 20×24 building for extra covered space. Common uses include firewood storage, mower parking, small equipment cover, or a shaded work area.

Mezzanines & Lofts

Mezzanines are uncommon at this size but a partial loft can work with taller leg heights. Use it for seasonal storage, bins, tools, or lightweight overhead organization.

Interior Partitions

Divide the 480 sq ft into a parking bay, storage zone, tool room, or small office corner. Steel stud partitions or framed interior walls can be added after installation.

Trim, Anchors, Gables

Decorative trim around doors, rooflines, and corners adds a finished look. Contrasting trim color makes a small 20×24 building look intentional and polished.

Flooring Prep

We don’t pour foundations, but we can guide your slab prep. Gravel works for open carports and basic storage, while a concrete pad is recommended for enclosed garages, studios, and workshops.

Wind & Snow Certification

Standard 115 MPH wind and 35 PSF snow load. Certified upgrades are available for coastal, hurricane-prone, mountain, and heavy snow regions.

Permit-Ready Drawings

Stamped engineered drawings, foundation plans, and code calculations are available for local permitting. Drawings can be matched to your county’s permit office requirements.

Door Locks & Access Control

Slide bolts, deadbolts, keypad entry, smart locks, and Wi-Fi connected garage door openers can be added for secure access to tools, vehicles, and valuables.

Fire Safety & Alarms

Smoke detectors, heat detectors, Class ABC extinguishers, and emergency lighting can be added for workshops, studios, and commercial storage applications.

Anchoring System

Concrete wedge anchors, asphalt anchors, mobile-home anchors, or auger ground anchors are included based on your chosen install surface.

Solar & Roof-Top Loads

Reinforced framing can be specified for small solar arrays, rooftop vents, antennas, or HVAC equipment. Mention rooftop loads during the quote phase.

20×24 Metal Building Codes, Permits & Engineering

Every 20×24 prefab steel building can be engineered, stamped, and certified to meet your local building codes. Permits are commonly required for enclosed garages, permanent workshops, commercial storage, and structures installed on concrete pads.

IBC/IRC
Minimum construction standards for building codes
NEC
Electrical safety to reduce fire and shock risk
IFGC
Safe operation of fuel gas appliances and equipment
IECC
Energy efficiency and conservation requirements
IMC
HVAC, ventilation, and exhaust system standards

We also adhere to plumbing codes, energy conservation standards, and any state or local requirements. Our team handles code compliance so you have total peace of mind.

How to Maintain a 20×24 Metal Building

Simple seasonal upkeep keeps your 20×24 prefab steel building structurally sound, weather-tight, and looking sharp through the full 20-year rust-through warranty period.

1
Clean Roofing & Siding
Use a garden hose, soft broom, or pressure washer on low setting to remove dirt, leaves, pollen, and debris. This helps protect the painted finish.
2
Inspect Caulking & Seals
Check weatherstripping around doors, windows, and panel joints. Reapply sealant as needed to prevent leaks.
3
Check Connections
Examine bolts, anchors, hangers, and fasteners. Tighten any loosened connections after storms or seasonal freeze-thaw cycles.
4
Touch Up Paint & Coatings
Spot paint scratched or chipped areas, especially around door openings, lower wall panels, and mower-contact zones.
5
Lubricate Doors & Locks
Oil walk-in door hinges, roll-up door tracks, rollers, and lock cylinders twice per year for smooth operation.
6
Gutter & Pest Control
Clear gutters and downspouts if installed. Watch for wasps, birds, rodents, or insects around eaves, corners, and stored materials.

What Can You Do with 480 Square Feet?

A 20×24 metal building gives you practical covered space for vehicles, tools, hobbies, equipment, storage, and light business use

2-Car Garage

Park two cars, motorcycles, ATVs, or a vehicle plus storage in a secure enclosed steel structure

Workshop

Use the compact clear-span layout for benches, tools, repairs, woodworking, and home projects

Storage Building

Store lawn equipment, seasonal items, bins, tools, and outdoor gear in a weather-tight building

Small Business Storage

Use the 480 sq ft footprint for inventory, supplies, contractor tools, and light business workflow

Roll-Up Door Access

Add one or two roll-up doors for vehicles, equipment, mower, ATV, or trailer access

Hobby Studio

Create a backyard studio, gym, music space, craft room, or project building

Farm & Ranch Use

Shelter compact tractors, tack, feed, tools, implements, and farm supplies

RV & Boat Cover

Use taller leg heights to protect smaller RVs, boats, campers, and utility trailers

3 Ways to Order Your 20×24 Metal Building

Customize your 20×24 steel building in our free 3D builder, request a free custom quote, or talk directly with a building expert. Reservation deposits stay flexible, with final balance due only after your installation is complete.

Request Free 20×24 Quote

Free custom design, reply within 24 hours

Tell us your requirements and our 20×24 building advisors will design and price your custom steel building for free. Best path if you need a garage, carport, workshop, certified drawings, or a unique storage layout.

  • Free expert design consultation
  • Permit and certification handled for you
  • Custom layout and engineered drawings
  • Quote delivered within 1 business day

Get My Free 20×24 Quote →

Free quote. Flexible deposit to reserve after approval.

Talk to a 20×24 Building Expert

Fastest answers, call or chat now

Speak directly with a building advisor who specializes in compact metal garages, carports, workshops, and storage buildings. Get pricing, permit guidance, and configuration help in minutes.

  • Instant answers over the phone
  • Expert advice on permits, codes, and sizing
  • Walk-through of customization options
  • Mon to Fri 8am to 6pm PST, Sat 9am to 3pm

📞 Call 1-877-275-7048 →

Toll-free. Speak with an expert now.

How the 3D Builder Works

Design your ideal 20×24 metal building in minutes

Choose structure icon

1. Launch Builder

Open the builder in a new tab so you can keep this page available while designing.

Customize icon

2. Configure Your Building

Set size, roof style, certification, colors, doors, side panels, and other custom options.

Save icon

3. Save Your Design

Copy your configuration code or summary before returning to this product page.

Order icon

4. Complete Your Request

Send us your final configuration and we will confirm pricing, scheduling, and installation details.

Ready to design your custom 20×24 metal building?

Open 3D Building Builder

Tip:Keep this page open so you can return and submit your final configuration with ease.

How Much Does a 20×24 Metal Building Cost?

No hidden fees on any 20×24 prefab steel building. A 20×24 metal carport starts around $3,495, an enclosed garage from $6,495, a metal barn from $5,995, an RV cover from $4,295, and a certified commercial build from $8,500. Final pricing depends on roof style, gauge, leg height, doors, color choices, certification, and installation state.

Building Configuration

A 20×24 carport is the lowest-cost entry point. Enclosing it as a garage adds wall panels, doors, and trim. Commercial certified builds add stronger framing and engineered drawings.

Your Location

Delivery distance, regional labor rates, local wind and snow loads, and state-specific certification requirements affect the final price.

Steel Gauge

14-gauge galvanized tubing comes standard. 12-gauge adds strength and is recommended for high-wind areas, workshops, commercial storage, or buyers who want the heaviest frame option.

Roof Style & Pitch

Regular Roof is the most affordable. A-Frame Horizontal adds curb appeal. Vertical Roof costs more but is the best choice for snow, heavy rain, and long-term drainage performance.

Certification

Certified buildings with engineered, stamped drawings cost more but may be required for permits, especially for enclosed garages, commercial storage, coastal zones, and heavy snow regions.

Doors, Windows, Insulation

Each roll-up door, walk-in door, window, and insulation package adds to the price. Most 20×24 garages use one or two roll-up doors plus one walk-in door.

20×24 Metal Building Complete Price Range

$3,495to$16,500

Range covers an open carport at the low end through a fully enclosed certified 20×24 garage or workshop with 12-gauge upgrade, insulation, multiple doors, windows, and engineered drawings at the high end.

Get My Free 20×24 Custom Quote →

20+ Years
In Business Since 2002
A+ BBB
Accredited Since 2009
48 States
Nationwide Coverage
1000s
Buildings Installed
4.8/5
Average Rating

Flexible Financing & Rent-To-Own

Choose the payment path that fits your project and budget

Traditional Financing

Credit Check Required

  • Finance your metal building project
  • Structured monthly payment options
  • Terms based on lender approval
  • Fast online application process
  • Ownership from day one

Check Eligibility

Rent-To-Own (RTO)

No Credit Check

  • No credit check required
  • Simple approval process
  • Low upfront commitment
  • Convenient monthly payments
  • Great for many standard metal structures

Apply for RTO

How Delivery & Installation Works

A simple step-by-step process for getting your 20×24 metal building installed

Order icon

Place Your Order

Submit your request for the 20×24 configuration and confirm colors, doors, certification, enclosure, and site details.

Step 1

Manufacturing icon

Production Scheduling

Your order is scheduled according to manufacturing capacity and your configured metal building requirements.

Step 2

Scheduling icon

Prepare the Site

Make sure your jobsite is level and accessible before the install team arrives. Concrete, gravel, asphalt, or level dirt can work for most 20×24 builds.

Step 3

Installation icon

Installation Day

Our crew installs the 20×24 metal building and verifies the final layout, door placement, anchoring, and exterior finish details.

Step 4

20×24 Metal Building Reviews from Verified Buyers

Homeowners, contractors, hobbyists, and small business owners across 48 states trust Steel And Stud for 20×24 metal carports, garages, workshops, storage buildings, and compact steel structures.

★★★★★

“Ordered a 20×24 fully enclosed garage for two vehicles and tools. The crew had it installed in one day, and the vertical roof has handled rain and snow with no issues.”

JM
Jason M.
Boise, Idaho • 20×24 Garage
✓ Verified Purchase
★★★★★

“We use our 20×24 as a workshop and mower storage building. Added one roll-up, one walk-in door, and two windows. It is the perfect size for our backyard.”

LT
Laura T.
Knoxville, Tennessee • 20×24 Workshop
✓ Verified Purchase
★★★★★

“Started with a 20×24 open carport for our boat and trailer. Later we added side panels for extra protection. It still looks new and has been worth every dollar.”

RS
Robert S.
Savannah, Georgia • 20×24 Carport
✓ Verified Purchase

Compare 20×24 vs. Other Metal Building Sizes

Need a different size? Compare prices and customize any of these prefab steel building sizes in our free 3D builder. Every order ships free to 48 states and includes free professional installation on tubular-frame buildings.

Feature 20×20 Building 20×24 Building 20×30 Building 20×40 Building
Square Footage 400 SF 600 SF 800 SF
Use Capacity Compact garage Garage + storage Large garage or RV use
Access Potential Good Excellent Excellent
Roof Style Customizable Customizable Vertical Recommended
Best For Small storage Expanded garage Workshop, RV, or commercial use
View 20×20 View 20×30 View 20×40

20×24 Metal Building FAQ: Cost, Permits, Sizes & Install

Everything you need to know before ordering your custom 480 sq ft prefab steel building. Get answers on pricing, configurations, leg heights, roof styles, colors, foundations, permits, and code compliance.

A 20×24 metal building costs between $3,495 and $16,500 depending on configuration. An open 20×24 metal carport starts around $3,495. A fully enclosed 20×24 metal garage starts around $6,495. A workshop, RV cover, barn, or certified commercial building costs more depending on doors, roof style, gauge, leg height, insulation, windows, certification, and your installation state.

A 20×24 prefab steel building gives you 480 square feet of usable space. It works well as a 2-car garage, metal carport, backyard workshop, storage building, boat cover, compact RV shelter, farm equipment cover, home gym, hobby studio, tool shed, or small business storage building.

Leg heights for a 20×24 steel building usually range from 8 feet to 16 feet. Standard carports start at 8 to 9 feet. Garages and workshops often use 9 to 12 feet. RV, boat, and taller storage layouts can use 12 to 16 feet for added clearance. Roof peak height adds additional height depending on roof style and pitch.

We offer three roof styles for every 20×24 steel building. Regular Roof has rounded corners and horizontal panels. A-Frame Horizontal, also called Boxed Eave, has a peaked residential look. Vertical Roof has vertical panels and is recommended for snow and rain runoff. Standard roof pitch is usually 3:12, with pitch upgrades available in some regions.

Choose from 17 standard color options for your roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White. You can mix and match colors or add wainscoting for a two-tone look.

Many areas require a building permit for permanent structures around this size, especially enclosed garages, workshops, and buildings on concrete slabs. A 20×24 is 480 square feet, so it is commonly above local permit exemption thresholds. We can provide certified buildings with engineered, stamped drawings that meet IBC, IRC, NEC, IFGC, IECC, and IMC codes when required.

Free delivery is included on every 20×24 metal building order in 48 states. Free professional installation is included on tubular-frame 20×24 steel buildings, including most carports, garages, barns, workshops, and storage buildings. Lead time is typically 4 to 6 weeks, and many 20×24 installations finish in one day.

A 20×24 prefab steel building can be installed on concrete, asphalt, gravel, or level dirt depending on configuration. Concrete pads provide the best foundation for enclosed garages, workshops, studios, and commercial use. Carports and equipment shelters can often install on gravel or compacted dirt with the correct anchors.

Standard 20×24 steel buildings are commonly rated for 115 MPH winds and 35 PSF snow load. Certified buildings can be engineered for higher ratings in hurricane, coastal, mountain, and heavy snow regions. Your final rating depends on local code requirements, wind exposure, snow load, roof style, gauge, and anchoring system.

A 20×24 can support many workshop and storage uses, including tools, benches, mowers, ATVs, motorcycles, compact tractors, and small equipment. For heavier machinery, choose 12-gauge framing, 26-gauge panels, certified engineering, and a reinforced concrete foundation sized for your equipment load.

Our 20×24 metal buildings can comply with IBC and IRC Building Codes, NEC Electrical Code, IFGC Fuel Gas Code, International Energy Conservation Code (IECC), and International Mechanical Code (IMC). We also account for applicable state, county, zoning, energy, and local requirements when a certified build is requested.

Request Your Custom Design & Quote

Tell us about your project and we’ll provide a custom design with exact pricing. No obligation, no pressure just helpful information to guide your decision.

1
Submit Your Info Fill out the form with your requirements and preferences.
2
Get Your Quote We'll email your custom design and pricing within 1 business day.
3
Review & Decide Ask questions, make changes, or proceed when you're ready.

🔒 A specialist calls within 1 business day. We never share your details.

FREE • NO-OBLIGATION QUOTE

Get Your Free Custom Building Quote

Tell us what you need and a building specialist will send your custom pricing — usually within 1 business day. No payment required.

✓ Free delivery & install✓ 20-year warranty✓ Engineer-certified

🔒 A specialist calls within 1 business day. We never share your details.

View Cart