1-877-275-7048|Free delivery — 48 states|20-year warranty on 12ga

50×70 Metal Building

900 sq ft — triple wide carport for vehicles or equipment

30′ x 30′ x 10′
14 Gauge
Local Certification Available
The 50×70 commercial steel building delivers 3,500 sq ft suited for large equipment storage, auto sales lots, and commercial service facilities. Prefab 12-gauge galvanized frame with a certified vertical roof system. Tailor lean-to additions, door quantity, eave height, ventilation type, and custom framing options.
⚠ This product isn't available in . Choose another state or contact us.
Starting From $80,021.00
Base kit with free install. Final price depends on gauge, certifications, doors, and your location. Reservation deposit typically 10-30% based on your state and manufacturer - final balance due after installation is complete.

No card charged online · Specialist calls within 1 business day · 10–20% deposit by phone

20-Year Warranty
Free Install
10-20% Deposit
Financing Available
50′ × 70′
Footprint
3,500 SF
Floor Space
12′ to 20’+
Leg Height
3 Styles
Roof Options
17 Colors
Roof, Wall, Trim
5 to 7 Wks
Lead Time

50×70 Metal Building Specs, Dimensions & Custom Options

A 50×70 metal building gives you 3,500 square feet of clear-span space for commercial storage, fleet operations, farm equipment, workshops, RV and boat storage, or light industrial use. Configure every spec below in our free 3D builder to match your exact use case, budget, and local building codes.

Building Footprint 50′ Wide × 70′ Longwith leg heights from 12′ to 20’+
Total Square Footage 3,500 square feetof usable clear-span interior or covered space
Building Configurations Commercial warehouse, fleet garage, equipment storage, agricultural barn, workshop, RV storage, boat storage, manufacturing spaceAll Available
Enclosure Options Open shelter, partially enclosed, fully enclosed with 4 walls, or custom sidewall and endwall configurations
Roof Styles Regular Roof, A-Frame Horizontal / Boxed Eave, or Vertical Roof. Vertical Roof is recommended for the 70′ length because it improves rain and snow runoff
Roof Pitch Options Standard 3:12 or 4:12 pitch depending on configuration, with 5:12 upgrades available for snow regions or steeper commercial aesthetics
Frame Gauge 14-gauge galvanized steel tubing standard on many tubular-frame builds, 12-gauge upgrade recommended for commercial, agricultural, and high-load use. Red iron upgrades available for heavy-duty commercial projects
Roof & Wall Panels 29-gauge sheet metal standard, 26-gauge upgrade available for hail-prone regions, coastal climates, or commercial durability
Door Options Roll-up doors from 8’x8′ up to 16’x16′, 36″ or 4’x7′ walk-in doors, framed openings, sliding doors, hydraulic doors, dock-ready openings, and rapid-entry doors for commercial use
Window Options 30″x30″, 36″x36″, 48″x48″, storefront-style fixed glazing, skylights, and insulated Low-E glass options
Color Options 17 colors for roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, White
Wind Rating 115 MPH standard, certified up to 170+ MPH for hurricane, coastal, and high-wind zones
Snow Load 35 PSF standard, certified up to 65+ PSF for heavy snow regions and engineered commercial projects
Certification Available for any 50×70 configuration with engineered, stamped drawings that meet IBC, IRC, NEC, IFGC, IECC, and IMC code requirements
Anchoring Concrete anchors, asphalt anchors, mobile home anchors, auger anchors, or engineered anchor bolt layouts for slab and footing installations
Free Delivery Included on every orderin the 48 continental US states
Free Installation Included on many tubular-frame 50×70 buildings. Custom red-iron commercial builds, complex door systems, or engineered commercial installations may carry a separate install fee.
Lead Time 5 to 7 weeks from order confirmation, with longer lead times possible during peak season or for engineered red-iron builds
Installation Time 3 to 5 days for most 50×70 tubular-frame configurations, longer for red iron, insulation, mezzanines, or complex door packages
Warranty 20-year rust-through warranty plus 90-day workmanship guarantee
20
Year
Frame Warranty
Limited + Product Pledge
20
Year
Sheet Metal Warranty
Paint Finish
90
Day
14-Gauge Frame
Workmanship Guarantee
90
Day
12-Gauge Frame
Workmanship Guarantee

12 Popular 50×70 Metal Building Uses (3,500 Sq Ft Layouts)

A 3,500 square foot prefab metal building handles commercial storage, equipment protection, fleet parking, agricultural operations, workshops, retail inventory, and light industrial layouts. Filter by use case below, pick the right product configuration, and customize colors, doors, leg height, gauge, insulation, and roof style in our free 3D builder.

What’s Included in a 50×70 Metal Building Kit?

Every 50×70 prefab steel building kit ships with the structural frame, panels, trim, anchors, fasteners, and hardware needed for your configuration. Free curbside delivery is included on every order, and professional installation is included on many tubular-frame builds.

Free With Every 50×70 Metal Building Order

Everything you need ships free with no hidden fees

  • Galvanized steel frame50′ x 70′ footprint with leg height of your choice from 12′ to 20’+
  • Choice of roof styleVertical Roof recommended for the 70′ length, with A-Frame Horizontal and Regular options available on select builds
  • 29-gauge sheet metal panelsRoof and sides in your color choice, with 26-gauge upgrade available
  • 17 color optionsPick roof, walls, and trim independently from 17 popular metal building colors
  • Galvanized purlins, girts, and bracingSecondary framing sized for the 50×70 span and selected load requirements
  • All hardware includedFasteners, color-matched screws, sealing strips, brackets, bolts, and connection hardware
  • Painted flashings, trim, ridge capsColor-matched to your panel choices, with a 20-year paint warranty
  • Foundation-matched anchorsConcrete, asphalt, mobile home, auger anchors, or engineered anchor bolt layouts based on your install surface
  • FREE delivery to all 48 statesCurbside delivery to your install address, no hidden freight charges on standard delivery
  • FREE installation on many tubular buildingsMost tubular-frame 50×70 structures include install. Red-iron commercial projects may be bid separately.
  • 20-year rust-through warrantyPlus 90-day workmanship guarantee on labor and assembly

+ Popular 50×70 Building Upgrades & Add-Ons

Optional add-ons to configure your 50×70 prefab building exactly the way you want it

  • Side panel enclosureConvert a 50×70 open shelter into a fully enclosed warehouse, garage, or agricultural building
  • 12-gauge steel frame upgradeRecommended for commercial, agricultural, high-wind, and heavy-use 50×70 buildings
  • Red iron frame upgradeFor crane loads, mezzanines, industrial equipment, and engineered commercial occupancy
  • 26-gauge sheet metal upgradeThicker panels for hail-prone regions, coastal climates, and longer exterior life
  • Certified / engineered drawingsStamped plans, foundation drawings, wet-stamped permit packages, and code calculations
  • Higher wind and snow ratingsUp to 170+ MPH wind and 65+ PSF snow load based on your local requirements
  • Commercial roll-up doors8’x8′ to 16’x16′ roll-up doors, hydraulic doors, dock openings, and rapid-entry doors
  • Walk-in doors and storefront entries36″ personnel doors, double doors, glass storefront entries, and ADA-compliant entry systems
  • Windows and skylights30″x30″, 36″x36″, 48″x48″, storefront glazing, skylights, and clerestory window bands
  • Insulation packagesSingle-bubble, double-bubble, fiberglass batt, spray foam, or insulated metal panels
  • Lean-to additionsCovered side spaces for trailer staging, firewood, equipment, livestock shade, or outdoor work areas
  • Taller leg heightsUp to 20’+ for equipment clearance, RV storage, mezzanines, tall racking, or commercial overhead access

Customize & Build Your 50×70 Metal Building Online

Every option below is selectable in our free 3D builder or your custom quote. The 50′ x 70′ footprint stays the same. Roof style, leg height, gauge, doors, windows, color, insulation, and certification are all yours to choose.

Leg Height (12′ to 20’+)

The 50×70 footprint stays fixed. Leg height is yours to choose. Equipment storage and fleet buildings commonly use 14′ to 16′. RV, agricultural, and commercial layouts often use 16′ to 20′. Taller engineered heights are available for racking, lifts, or large machinery.

3 Roof Styles

Regular Roof is available on select low-cost structures, A-Frame Horizontal gives a classic boxed-eave look, and Vertical Roof is recommended for the 70′ building length because vertical panels move rain and snow efficiently off the roof.

Roof Pitch & Slope

Standard 3:12 or 4:12 roof pitch depending on configuration. Upgrade to 5:12 for heavy snow regions, stronger drainage, or a steeper commercial appearance. Cool roof coatings are available for hot climates and conditioned spaces.

Frame Gauge (14, 12, or Red Iron)

14-gauge tubing is standard on many tubular-frame builds. 12-gauge is recommended for most 50×70 commercial, agricultural, or high-use buildings. Red iron framing is available for heavy equipment, mezzanines, crane loads, or engineered industrial projects.

Sheet Metal Gauge (29 or 26)

29-gauge sheet metal panels are standard for roof and walls. Upgrade to 26-gauge for hail-prone regions, coastal climates, or commercial applications that need a thicker exterior panel system.

Certification & Engineering

Certified 50×70 buildings come with stamped engineered drawings, foundation plans, and wind/snow calculations matched to your local code. Certification is recommended for commercial, agricultural, and permitted residential accessory buildings.

Roll-Up Garage Doors

Roll-up doors from 8’x8′ up to 16’x16′ are available. Fleet garages often use multiple 12’x12′ or 14’x14′ doors. Agricultural and RV storage buildings may require 14′ or 16′ tall doors for taller equipment.

Walk-In Doors

36″ personnel doors, 4’x7′ commercial doors, double doors, and insulated steel security doors are available. Place doors on front, side, or back walls to match workflow and emergency access needs.

Hydraulic & Rapid Doors

For commercial or agricultural use, choose hydraulic one-piece doors, high-speed rapid-roll doors, sliding barn doors, or dock-ready openings. Auto-lock and remote-controlled opener systems can be added for secure access.

Windows & Skylights

30″x30″, 36″x36″, and 48″x48″ insulated glazing options are available. Add skylights, clerestory windows, or storefront glass for workshops, showrooms, retail use, or conditioned office space.

Framed Openings

Order framed openings for future windows, HVAC penetrations, dock doors, sliding doors, storefront entries, exhaust fans, or future expansion. Framed openings save cutting and structural work later.

Garage Door Openers & Windows

Chain-drive, jackshaft, commercial hoist, or smart Wi-Fi-enabled openers are available. Window kits in roll-up doors add daylight without sacrificing security in fleet, garage, or shop layouts.

17 Standard Color Options

Choose from Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White. All colors are available for roof, walls, and trim.

Mix-and-Match Roof, Walls, Trim

Pick a different color for your roof, wall panels, and trim. Popular 50×70 combinations include Pewter Gray walls with Black trim, Galvalume roof with White walls, or Barn Red walls with White trim for agricultural use.

Wainscoting (Two-Tone Walls)

Add wainscoting for a premium two-tone look. A contrasting lower wall panel is useful for retail showrooms, garages, agricultural buildings, and commercial facilities where the lower wall sees more wear.

Galvalume (Bare Metal Finish)

Galvalume is a hot-dipped aluminum-zinc coating with no paint. It is cost-effective, corrosion resistant, and popular for agricultural, industrial, and rural commercial 50×70 buildings.

Painted Trim & Flashings

Color-matched ridge caps, eave trim, corner trim, gable trim, and rake trim ship with your building package. Color-coded screws match your panel choices for a clean finished appearance.

Custom Color Match

Need to match an existing building, franchise palette, farm color, HOA requirement, or municipal standard? Custom paint matching is available for an upcharge. Ask your building advisor for samples and approval documentation.

Insulation Options

Choose single-bubble radiant barrier, double-bubble insulation, fiberglass batt, spray foam, or insulated metal panels. Insulation is recommended for workshops, showrooms, sports facilities, offices, and temperature-sensitive storage.

Lean-To Additions

Add lean-tos on one or more sides of your 50×70 building for trailer staging, hay storage, covered loading, outdoor work areas, livestock shade, firewood, or additional equipment protection.

Mezzanines & Lofts

Add a mezzanine or partial loft for parts storage, office space, inventory, or mechanical systems. Mezzanines require engineering and are best paired with taller leg heights and upgraded framing.

Interior Partitions

Divide the 3,500 sq ft into bays, offices, restrooms, utility rooms, storage zones, or work areas. Steel-stud partitions and insulated interior panels are available for mixed-use commercial layouts.

Trim, Anchors, Gables

Decorative gables, contrasting trim, door surrounds, and color-matched corners create a finished look. Anchoring is selected based on slab, asphalt, dirt, gravel, or engineered foundation requirements.

Flooring Prep

We do not pour foundations, but we guide you on slab specs. A 50×70 often uses a reinforced concrete slab for commercial, garage, or warehouse use. Gravel or compacted dirt may work for open agricultural shelters.

Wind & Snow Certification

Standard ratings commonly start at 115 MPH wind and 35 PSF snow load. Certified upgrades are available up to 170+ MPH wind and 65+ PSF snow load based on your local code and site conditions.

Permit-Ready Drawings

Stamped engineered drawings, foundation plans, and code calculations can be provided for your permit office. Certified 50×70 builds can be matched to IBC, IRC, NEC, IFGC, IECC, and IMC requirements.

Door Locks & Access Control

Slide bolts, deadbolts, keypad entry, smart locks, commercial access control, and Wi-Fi connected opener systems are available. Add auto-lock systems for fleet, warehouse, or business storage use.

Fire Safety & Alarms

Smoke and heat detectors, Class ABC extinguishers, emergency exit signage, fire-rated partitions, and sprinkler-ready framing are available for commercial and institutional 50×70 configurations.

Anchoring System

Concrete wedge anchors, asphalt anchors, mobile-home anchors, auger anchors, or engineered anchor bolt patterns are selected based on your foundation type, wind load, snow load, and local requirements.

Solar & Roof-Top Loads

Engineered framing can support solar panel arrays, rooftop HVAC, vents, fans, satellite equipment, or other rooftop loads. Reinforced roof framing should be specified before order if you plan to add solar or rooftop equipment.

50×70 Metal Building Codes, Permits & Engineering

Every 50×70 prefab steel building can be engineered, stamped, and certified to meet local building codes. Certification is recommended for commercial buildings, agricultural operations, permitted garages, and any structure requiring wind, snow, or foundation calculations.

IBC/IRC
Minimum construction standards for building codes
NEC
Electrical safety to reduce fire and shock risk
IFGC
Safe operation of fuel gas appliances and equipment
IECC
Energy efficiency and conservation requirements
IMC
HVAC, ventilation, and exhaust system standards

We also follow plumbing codes, energy conservation standards, ADA requirements when applicable, and any state or local commercial occupancy requirements. Our team helps coordinate code compliance so your 50×70 building is designed for your jurisdiction.

How to Maintain a 50×70 Metal Building

Seasonal maintenance keeps your 3,500 sq ft prefab steel building structurally sound, weather-tight, and looking sharp throughout the full 20-year rust-through warranty period.

1
Clean Roofing & Siding
Rinse or pressure wash roof and wall panels twice a year to remove dirt, pollen, leaves, salt, and debris. Clean panels protect paint finish and reduce corrosion risk.
2
Inspect Caulking & Seals
Check sealant around doors, windows, wall penetrations, trim, and roof seams. Reapply caulking as needed to prevent leaks and protect insulation.
3
Check Connections
Inspect anchors, bolts, braces, panel screws, door hardware, and frame connections after major storms and at least once per year. Tighten loose hardware promptly.
4
Touch Up Paint & Coatings
Spot paint scratches, dock scuffs, trailer impacts, mower damage, or chipped panels. Lower wall areas near doors and loading areas usually need the most attention.
5
Lubricate Doors & Locks
Oil hinges, rollers, tracks, openers, lock cylinders, hydraulic door hardware, and dock equipment to keep access systems moving smoothly.
6
Gutter & Pest Control
Clear gutters and downspouts for proper drainage. Watch for birds, rodents, insects, or nesting pests around eaves, corners, storage zones, and dock areas.

What Can You Do with 3,500 Square Feet?

A 50×70 metal building gives you commercial-grade covered space for storage, equipment, vehicles, business operations, agricultural use, and light industrial workflows

Commercial Storage

Store inventory, pallets, tools, parts, and business supplies in a secure enclosed steel structure

Service & Repair Bays

Use the clear-span layout for auto service, equipment repair, fabrication, or maintenance work

Equipment Shelter

Protect tractors, machinery, lifts, trailers, and expensive tools from weather and theft

Business Operations

Use the space for staging, packing, shelving, inventory control, and workflow management

Large Door Access

Add 12′ to 16′ roll-up doors for trucks, trailers, RVs, equipment, and commercial loading

Training Facility

Build out a private gym, indoor sports space, batting cage area, or multipurpose recreation facility

Farm & Ranch Use

Shelter hay, feed, tack, tractors, implements, trailers, and livestock equipment

Fleet Parking

Park work trucks, service vans, trailers, and vehicles with room for tools and storage zones

3 Ways to Order Your 50×70 Metal Building

Customize your 50×70 steel building in our free 3D builder, request a free custom quote, or talk directly with a building expert. Reservation deposit typically ranges from 10% to 30% based on your state, manufacturer, and project complexity. Final balance is due only after installation is complete.

Request Free 50×70 Quote

Free custom design, reply within 24 hours

Tell us your requirements and our 50×70 building advisors will design and price your custom steel building for free. Best path if you need certified drawings, permit help, commercial doors, insulation, red iron upgrades, or a unique mixed-use layout.

  • Free expert design consultation
  • Permit and certification handled for you
  • Custom layout and engineered drawings
  • Quote delivered within 1 business day

Get My Free 50×70 Quote →

Free quote. Flexible deposit to reserve after approval.

Talk to a 50×70 Building Expert

Fastest answers, call or chat now

Speak directly with a building advisor who specializes in large metal buildings. Get pricing, permit guidance, door layout recommendations, certification help, foundation guidance, and customization advice in minutes.

  • Instant answers over the phone
  • Expert advice on permits, codes, and sizing
  • Walk-through of customization options
  • Mon to Fri 8am to 6pm PST, Sat 9am to 3pm

📞 Call 1-877-275-7048 →

Toll-free. Speak with an expert now.

How the 3D Builder Works

Design your ideal 50×70 metal building in minutes

Choose structure icon

1. Launch Builder

Open the builder in a new tab so you can keep this page available while designing.

Customize icon

2. Configure Your Building

Set size, roof style, certification, colors, doors, side panels, insulation, and other custom options.

Save icon

3. Save Your Design

Copy your configuration code or summary before returning to this product page.

Order icon

4. Complete Your Request

Send us your final configuration and we will confirm pricing, scheduling, engineering, and installation details.

Ready to design your custom 50×70 metal building?

Open 3D Building Builder

Tip:Keep this page open so you can return and submit your final configuration with ease.

How Much Does a 50×70 Metal Building Cost?

No hidden fees on any 50×70 prefab steel building. A 50×70 open equipment shelter starts around $24,500, an enclosed agricultural or storage building from $34,500, a commercial warehouse from $38,500, and a fully engineered red-iron or insulated commercial build can reach $118,000+ depending on doors, gauge, certification, insulation, and foundation requirements.

Building Configuration

A 50×70 open shelter is the lowest entry point. Fully enclosing the structure adds wall panels, doors, trim, framing, anchors, and labor. Commercial certified builds add engineered drawings and load-specific upgrades.

Your Location

Delivery distance, regional labor rates, local wind and snow loads, permit requirements, and state-specific engineering rules affect the final 50×70 price.

Steel Gauge

14-gauge tubing is available on some configurations. 12-gauge framing is recommended for most 50×70 commercial and agricultural uses. Red iron adds cost but supports heavier loads, mezzanines, and industrial equipment.

Roof Style & Pitch

Vertical Roof costs more than Regular Roof but is strongly recommended for the 70-foot length. Roof pitch upgrades and standing-seam options increase price but improve drainage, appearance, and commercial performance.

Certification

Certified buildings with engineered, stamped drawings cost more but are required by many counties for commercial, agricultural, or large accessory buildings. Certification helps with permits, inspections, and insurance.

Doors, Windows, Insulation

Large roll-up doors, dock openings, walk-in doors, storefront glass, windows, skylights, and insulation packages are major price variables. Commercial door arrays can significantly increase total project cost.

50×70 Metal Building Complete Price Range

$24,500to$118,000+

Range covers an open equipment shelter at the low end through a fully enclosed commercial-certified 50×70 building with 12-gauge or red-iron upgrades, insulation, large commercial doors, stamped engineered drawings, and higher wind or snow ratings at the high end.

Get My Free 50×70 Custom Quote →

20+ Years
In Business Since 2002
A+ BBB
Accredited Since 2009
48 States
Nationwide Coverage
1000s
Buildings Installed
4.8/5
Average Rating

Flexible Financing & Rent-To-Own

Choose the payment path that fits your project and budget

Traditional Financing

Credit Check Required

  • Finance your metal building project
  • Structured monthly payment options
  • Terms based on lender approval
  • Fast online application process
  • Ownership from day one

Check Eligibility

Rent-To-Own (RTO)

No Credit Check

  • No credit check required
  • Simple approval process
  • Low upfront commitment
  • Convenient monthly payments
  • Great for many standard metal structures

Apply for RTO

How Delivery & Installation Works

A simple step-by-step process for getting your 50×70 metal building installed

Order icon

Place Your Order

Submit your request for the 50×70 configuration and confirm colors, doors, certification, insulation, and site details.

Step 1

Manufacturing icon

Production Scheduling

Your order is scheduled according to manufacturing capacity, engineering requirements, and your configured metal building package.

Step 2

Scheduling icon

Prepare the Site

Make sure your jobsite is level, accessible, and ready for crews. Concrete slab, anchor layout, lift access, and electricity availability should be reviewed in advance.

Step 3

Installation icon

Installation Day

Our crew installs the 50×70 metal building and verifies the final layout, door placement, anchoring, exterior finish, and trim details.

Step 4

CUSTOMER REVIEWS

What real 50×70 Metal Building buyers say.

No reviews yet for the 50×70 Metal Building

Be the first verified buyer to share your experience. Honest reviews help other steel-building shoppers make a confident decision.

✍ Write the first review

Compare 50×70 vs. Other Metal Building Sizes

Need a different size? Compare prices and customize any of these prefab steel building sizes in our free 3D builder. Every order ships free to 48 states, includes professional installation on many tubular-frame buildings, and comes with a 20-year rust-through warranty.

Feature 40×60 Building 50×70 Building 50×80 Building 60×80 Building
Square Footage 2,400 SF 4,000 SF 4,800 SF
Use Capacity Workshop + storage Larger warehouse use Expanded operations
Access Potential Excellent Maximum Maximum
Roof Style Customizable Vertical Recommended Vertical Recommended
Best For Shops and garages Commercial storage Industrial operations
View 40×60 View 50×80 View 60×80

50×70 Metal Building FAQ: Cost, Permits, Sizes & Install

Everything you need to know before ordering your custom 3,500 sq ft prefab steel building. Get answers on pricing, configurations, leg heights, roof styles, colors, foundation prep, certification, and code compliance. Still have questions? Call our 50×70 building advisors at 1-877-275-7048.

A 50×70 metal building typically costs between $24,500 and $118,000+ depending on configuration. An open equipment shelter starts around $24,500, an enclosed agricultural or storage building starts around $34,500, a commercial warehouse from $38,500, and a fully engineered red-iron or insulated commercial build can reach $118,000+ depending on doors, gauge, certification, insulation, foundation requirements, and your installation state.

A 50×70 (3,500 sq ft) prefab steel building works as a commercial warehouse, fleet garage, farm equipment building, agricultural barn, RV and boat storage facility, contractor storage building, auto shop, manufacturing space, indoor training facility, retail showroom, municipal equipment building, or community hall. The 50×70 footprint gives you enough room for large doors, clear-span storage, vehicle circulation, shelving, and work zones.

Leg heights for a 50×70 steel building commonly range from 12 feet up to 20 feet or more. Equipment storage and fleet garages often use 14 to 16 feet. RV storage, agricultural buildings, and commercial warehouses commonly use 16 to 20 feet. Engineered taller heights are available for mezzanines, tall racking, overhead doors, lifts, or specialized equipment clearance.

We offer Regular Roof, A-Frame Horizontal / Boxed Eave, and Vertical Roof options on many 50×70 steel buildings. Vertical Roof is strongly recommended for the 70-foot length because its vertical panel orientation helps rain and snow move off the roof more efficiently. Standard pitch is commonly 3:12 or 4:12, with 5:12 upgrades available for heavy snow regions or steeper aesthetics.

Choose from 17 standard color options for your roof, walls, and trim independently: Barn Red, Beige, Black, Brown, Burgundy, Burnished Slate, Clay, Galvalume, Green, Patriot Red, Pewter Gray, Quaker Gray, Rawhide Tan, Royal Blue, Sandstone, Slate Blue, and White. Mix-and-match panels, wainscoting, and custom color matching are available for commercial branding, farm aesthetics, or HOA requirements.

Most areas require a permit for a 50×70 metal building because it is a large 3,500 sq ft structure. Commercial, agricultural, and fully enclosed builds often require engineered drawings, foundation details, wind and snow load calculations, and local code review. We supply certified buildings with stamped drawings that meet IBC, IRC, NEC, IFGC, IECC, and IMC code requirements when your jurisdiction requires them.

Free delivery is included on every 50×70 metal building order in 48 states. Free professional installation is included on many tubular-frame 50×70 buildings, depending on configuration and manufacturer. Custom red-iron commercial builds, engineered industrial projects, or complex door systems may carry a separate installation fee. Lead time is typically 5 to 7 weeks from order confirmation, and installation often takes 3 to 5 days for standard tubular-frame configurations.

A 50×70 prefab steel building can be installed on concrete, asphalt, gravel, or level dirt depending on configuration, but concrete is strongly recommended for fully enclosed garages, warehouses, workshops, and commercial buildings. Engineered concrete slabs with thickened edges or footings may be required for certified commercial builds, heavy equipment, red iron framing, mezzanines, or high-wind and snow-load regions.

Standard 50×70 steel buildings commonly start around 115 MPH wind and 35 PSF snow load. Certified buildings can be engineered for higher ratings, including 170+ MPH winds for hurricane and coastal zones, and 65+ PSF snow loads for heavy snow regions. Final rating depends on your location, building configuration, roof style, frame gauge, anchoring, and engineering package.

Yes, a 50×70 metal building can support heavy machinery when properly engineered. For forklifts, lifts, fabrication equipment, agricultural machinery, mezzanines, or overhead loads, we recommend 12-gauge framing or red iron upgrades, reinforced foundations, certified engineering, and load-specific design review. Your building advisor can help match the structure to your exact equipment requirements.

Our 50×70 metal buildings can be engineered to comply with IBC and IRC Building Codes, NEC Electrical Code, IFGC Fuel Gas Code, International Energy Conservation Code (IECC), and International Mechanical Code (IMC). Commercial and institutional projects may also require ADA, fire code, energy code, plumbing, ventilation, occupancy, and local zoning compliance. Stamped engineering plans are available with certified builds for permit applications.

Request Your Custom Design & Quote

Tell us about your project and we’ll provide a custom design with exact pricing. No obligation, no pressure just helpful information to guide your decision.

1
Submit Your Info Fill out the form with your requirements and preferences.
2
Get Your Quote We'll email your custom design and pricing within 1 business day.
3
Review & Decide Ask questions, make changes, or proceed when you're ready.

🔒 A specialist calls within 1 business day. We never share your details.

FREE • NO-OBLIGATION QUOTE

Get Your Free Custom Building Quote

Tell us what you need and a building specialist will send your custom pricing — usually within 1 business day. No payment required.

✓ Free delivery & install✓ 20-year warranty✓ Engineer-certified

🔒 A specialist calls within 1 business day. We never share your details.

View Cart